I am gathering up some stuff to put away for the potential trip home in oct/nov from MT to MS in the 63 cdv.

i thought a fuel pump may be a good piece to have nearby,  Are the newer ones like you can get at rock auto reliable and do they fit as they should or are original pumps around and a better bet/   Jason or Russ?   

Thanks,, 

Views: 188

Reply to This

Replies to This Discussion

I have never had any issue with the original or new aftermarket or rebuilt original style, but have heard there have been issues with some of the newer or rebuilt ones. Russ reported he had seen where they had not staked the valves in place, causing them to come apart and stop pumping. I have found the best new aftermarket pump, which looks like the original style fuel pump is the Spectra Premium B1297MP fuel pump. For years I kept a stock of new ones but the supply run out. AutoZone lists them now for about $70 but when you go to check out they are out of stock. The other new fuel pump I have seen in the last few years has been the Airtex 6744 Fuel Pump. I have not experience with this fuel pump but believe it may be the one others have had issues with the valve not being staked.

For years there were new single uni-body pumps available at auto parts stores like the one seen on the right in picture below that did not come apart. I also had not issue with those. 
If you want good used from known running engines, I sell the original style like seen on the left for $40 and the unibody style like on the right for $20.  

 

I put a new Airtex pump on my 63, it worked well for 15k miles until the inlet valve fell out of the pump body. The valve was not staked in, just a press fit causing the failure. If you buy the Airtex pump, take the bottom cover off to see if the valve is just pressed in. If so, stake it with a punch so it won't fall out. 

ok, thanks for the information,,,helps me out making a decision

Spectra Premium SP1297MP Mechanical Fuel Pump for 85:86 USD.

Not sure if its the same B1297MP Jason suggest.

RSS

Photos

  • Add Photos
  • View All

Forum

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Cees de Bunje 7 hours ago. 13 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox yesterday. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Nice 1963 to 1967 Cylinder Head Water Outlet Pipe Assembly - $150

Started by Jason Edge in For Sale yesterday. 0 Replies

I just pulled a very good Cadillac Cylinder Head Water Outlet Pipe for cars with AC with the extended arm for compressor. That came off a running parts and is a nice piece. Included is a new 180…Continue

40A CB in fuse box

Started by Larry Rees in General Discussion on Tuesday. 0 Replies

Don’t know if this is common knowledge or easy to find but was able to order a 40A Circuit breaker to fit in the fuse box from Crimp Supply inc or on Amazon from the same company source. Just thought…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service