Im having a hard time locating the gear for the power vent window in my 64 Eldo. The existing one has 14 teeth and all I seem to be finding are ones with 17 teeth. Any suggestions?
Thanks
Tags:
The original gears seem to indeed have - or in my case had - only 14 teeth, while the reproduction has 17. I bought mine either from Hydro Electric or from TA Motor in Sweden. I believe it only opens 90 degrees.
Additionally, the other end of the gear is different. The gap where you bolt the window frame is much wider and does not surround the frame on all sides. Therefore, the vent window is not firmly attached to the gear, which is very annoying. How have you solved this problem? The original type clips are not sufficient.
The Auto City Classic gears seem to have the correct gap.
Started by Robert Alan Shannon in General Discussion. Last reply by Robert Alan Shannon 2 hours ago. 2 Replies 0 Likes
Could anyone give me the Gates or Dayco number for the alternator V belt, just can't remember it and trying to get her back on the road after many years. 63 wA/CContinue
Tags: belt, V, alternartor
Started by Michael Monson in 1963/64 Cadillac Specific Discussion 12 hours ago. 0 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Started by Jason Edge in Trivia 19 hours ago. 0 Replies 0 Likes
Keeping the trivia "glass related":- How Many Different Windshields Were Used On All 1963 & 1964 Cadillac Body Styles? - What were the two main differences or subgroups of windshields? Hint, one…Continue
Started by Jason Edge in Trivia. Last reply by Jason Edge 19 hours ago. 6 Replies 0 Likes
What % of 1963 and 1964 Cadillacs came with the optional "soft ray" tented glass? 1963 & 1964 were very close, so if you get one you will get the other. Need to get it within 3%. So, who will…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by