Help looking for a 1964 Eldorado front fender for a convertible.

Thank you please contact djjmoreno84@gmail.com

Views: 40

Reply to This

Replies to This Discussion

I've got a left fender from a 64 deVille that needs a bit of work and holes need to be moved for your particular trim. For details Click Here

I have a rust free and dent free left 64 fender.  Good old Arizona sheet metal to your rescue.

Just email me at  russ85747@hotmail.com   with your zip code for a shipping quote. 

I have a front left fender from my 1964 DeVille Convertable. The vehicle I bought came with A NOS Eldorado fender. I put that on my DeVille Convertable. Please call Jon @ 5613010659. To discuss my very good price. :)

I have a front left fender from my 1964 DeVille Convertable. The vehicle I bought came with A NOS Eldorado fender. I put that on my DeVille Convertable. Please call Jon @ 5613010659. To discuss my very good price. :)

$10 and you pay the shipping. I will send pictures upon request. Thanks Jon

RSS

Photos

  • Add Photos
  • View All

Forum

1963 Cadillac Convertible Door Jamb Switch

Started by Lee Martin in 1963/64 Cadillac Specific Discussion. Last reply by Lee Martin 12 hours ago. 3 Replies

Okay, it's "dumb question time!"  Here's mine:  Does anyone know the part number for the 63 convertible door jamb switch (3 prong)?  I cannot find this in the manual...thanks!Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Rear main Follow up replacement and repair,,

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kim K Kaiser on Thursday. 38 Replies

Well, got it all together,, Jason, i was looking in the wrong chapter in the manual on the starter,, got that figured out.  everything hooked back upGot it put back together, started up, and oil…Continue

STEERING GEAR

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 10 Replies

IN addition to the main seal leak,,which i am going to tackle again tomorrow,i also have a leak in what seems to be the steering gear.  I have checked to connections from the pump, and its dry on…Continue

Blog Posts

driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!

--Jake

Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…

Continue

Carter AFB carburetor question

Posted by Ray Schick on October 7, 2019 at 8:29pm 8 Comments

3655S carb, and a 3656S carb .I know the difference is one is for A/C and the other in for a non A/C car . Now the question is : can I use the carb bowl from the A/C car on the non A/C car ? They look the same set up next to each other

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service