OK. So I will be taking another large batch of bolts, etc for Cadmium Plating in the near future and want to take a novelty or display item like I did the valve cover you see below. It was a bit rough, and I had ground the wire tabs off and was going to just paint and outline the script and throw up on the garage, but thought it would be neat to see it Cadmium plated. I thought it turned out pretty good, at least in the garage and not in an art museum! LOL. So now, I want to do something different. I know since they dip in Muriatic acid it needs to be steel andn not aluminum. I'm almost thinking of dong a hubcap just for the kicks and grins and maybe outlining it... just don't know. Keep in mind I'm paying by the pound and want something relatively light weight for the rack plating? Any thought?

ps. Yes I have had some cool Elvis plates in the past.. in fact I have had THE Elvis plate - ELVIS for about 15 years  it of course goes on the Elvis-Scalade! LOL!

Views: 70

Reply to This

Replies to This Discussion

Im thinking something in interior. Horn surround? Turn signal lever? Shift lever? Ignition key bezel?

63 levers or 64 HM levers would be good..  no rubber caps on the end. I kinda like the horn shroud (surround).  I did add a couple of the 64 glove box door Cadillac badges in the bins.  I guess I want something big enough to display on the wall or shelf like the valve cover. The horn shroud has potential. 

Now Jason, you're starting to become the King Midas of Cadmium : )

This has been a venture 24 years (and 53 parts cars) in the making! LOL

Thought i would pop back on this thread. I dropped off another huge batch of Cadillac Metal to get the King Midas Cadmium treatment on Feb 6 and thought I would share the last thing I grabbed for the metal stash before we rolled out on Feb 6 toward Winston-Salem to drop off the goods -  I basically grabbed the mail box off the front of our old house and thru it into one of the bins!  We have one of those brass plated mail boxes on the front porch and guess it is about as old as we have been in the house.. about 25 or so years and was showing some wear. Anyway, it will get the brass treatment. For kicks and grins I thru in a couple of those 64 glove box door "Cadillac" bages, and I think I put a hub cap crest or two in there, not to sell but just to display somewhere or some how. I almost grabbed a hubcap I had converted into a light way back by drilling a hole through the center but decided that woudl wait. I was surprised at the weight I had collected for the 2nd batch.. it felt like more than the 1st batch which was 396 lb!  Anyway, I hope to get the gold bling back in a few weeks and start sorting through that batch!  

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 2 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Happy Father's Day!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 15 hours ago. 1 Reply

Happy Father's Day to my dad, Sam Edge. He was there in the beginning with…Continue

622 nss 63 tilt

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 yesterday. 7 Replies

Previously, i mentioned the  bu lights didnt work, and conversatiin went to nss.   Mine has the two jumped wire bypass so car will go in drive/start.Got the switch out and the outer tract plastic is…Continue

Timing chain help

Started by Cody in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Saturday. 3 Replies

I have the front of my engine taken apart to replace the timing chain and gears. According to the manual it says to remove the cam gear and chain together then the crank gear.I can’t for the life of…Continue

Blog Posts

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service