If anybody has the 3D views of 64 Fleetwood Limo Please let me know

Hi Guys, I am in need of 3D views as in the  LINK HERE

This is for the purpose of placement of components in my EV conversion envisaged.

I guess many of you had read abt it sometime back - and it is still live and progressing.

I have now figured out the components I need to do the conversion.

Now I am trying to draw 3D drawings to place the components within the car, so that

I have a clear understanding of spacing and feasibility / packaging.

I am planning running two AC compressors ( one for the driver and one for the back with

overhead AC evap. with remote control ) working independently.

What are your thoughts  abt that idea ?

I think this will save energy ( battery life ) on the long run.

I am also debating to use vac. pump or Hyd. pump for power brakes.

Give me your diligent feedback - if knowledgeable in this area pls. 

If anybody can lead me to a existing 3D sketches of this model would be great.

Thanx Y'll in advance.

Views: 78

Reply to This

Replies to This Discussion


i would doubt anyone would take the time to do an accurate rendering of a limo, so have you considered using a photogrammetry app you can get for free on your phone, then tweaking the mesh in blender(free desktop app)?



  • Add Photos
  • View All


Our 1963/64 Cadillac Chapter Store is Open!

Started by Jason Edge in Chapter Discussion. Last reply by Jason Edge 7 hours ago. 2 Replies

Dave Leash, the CLC Sales & Marketing Rep,  has set up our own…Continue

Dash Lights

Started by Mark Borer in Restoration Discussion. Last reply by Tony Cassata 11 hours ago. 7 Replies

L+GJust went thru the dash compartment replacing all the burned out light bulbs.Everything is now working but am unhappy with the amount of light on the left side of the speedometer (compared to the…Continue

Transmisson Rebuild Time?

Started by Logan Robb in General Discussion. Last reply by Logan Robb 17 hours ago. 4 Replies

I've posted about this issue in the past and I thought I had it resolved. It would appear I do not as it has reared its ugly head again. My TH400 in the 64 Fleetwood has an intermittent problem of…Continue

Today's project, radiator overflow system

Started by Joe DiIaconi in General Discussion. Last reply by Kurt yesterday. 4 Replies

Installed a radiator overflow system. Could not have been simplerContinue

Blog Posts

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 

I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…


1964 power steering sector rebuild

Posted by CHRIS CARLSON on March 20, 2023 at 11:32pm 3 Comments

 I'm having my steering sector rebuilt, and considering changing it from 20-1 ratio 4.2 turns lock to lock to 3.5 turns lock to lock @ 16-1 ratio, If i change from a 3 1/4" box to a 3" box i could have a 14-1 Ratio steering response would be faster, shorter distance to turn the wheel to get a response,   has anyone done this? and how do you like it? thank you

1964 Daville dashboard clock

Posted by Willem Bol on March 13, 2023 at 11:33am 2 Comments


Can somebody help me finding a dashboard clock  for my 1964 Cadillac DeVille Convertible?

Thank you in advance,

Willem Bol

The Netherlands

Does anyone know where I can get the bushings for AC compressor mount on the 429?

Posted by Robert Schles on February 21, 2023 at 11:45am 2 Comments

I've looked at the usual rubber sources but couldn't find any. 


  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service