I've got my Rochester carb rebuilt 3 years ago but seems like the accelerator pump got eaten through and gas is coming out of it and being poured on the engine.

I was told to switch the accelerator pump for the leather one!

Does anybody have any experience with leather accelerator pumps ???


Views: 305

Reply to This

Replies to This Discussion

They will work fine ,as long as they are installed correctly
All accelerator pumps must move freely in it cyclinder ,and not get kinked

Leather is/was the preferred choice. The cheaper rubber cups became the norm.  You could see if a deathanol friendly rubber cup is available.

All I have ever used in my carter AFB is the leather pump.

Mack,  can you share with me where you sourced the correct leather pump?

Edelbrock SB your source for a new replacement accelerater pumps for the Carter or Edelbrock carbs
They are basicly the very same carb --as Edelbrock bought the rights to manufacture the Carter carb
There is a slight difference in the size of the carbs total venture area ( total carb top opening is slightly larger than the Carter )
The stock air cleaner will require an adapter if using it -- or use a replacement after market air cleaner for improved air flow to the carb


Thanks guys!  I actually have the Rochester carb (should have mentioned that).  I wonder if the leather pump will work on the Roch........I'll call and ask.

I'm also trying to drill out the choke tube of my intake manifold.  I purchased a new choke tube from Chip on Ebay, but I also need the spiral piece that fits inside the tube.  Any ideas where I can source that?  I emailed Chip as well and waiting to hear back.

I remember seeing one somewhere in the parts shed.   Email me and I will locate it.   russ85747@hotmail.com   

I do not know the carb you have very well myself so someone with more experience with that carb should chime in 

The leather accelerator pump— I know —was for the original Carter carb from my own experience 

The way  that carb came from the factory 




  • Add Photos
  • View All


1964 Cadillac Coupe Deville Wiring plan

Started by Kai Dröse in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 10 hours ago. 7 Replies

Hi from germany,i know here is a many content about wiring plans and so on.but i need the correct wiring plan for my new dream car ;) the passenger window does not work…Continue

64 Fleetwood Trans Issues

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 10 Replies

I've posted a few times about the strange issue I have with the trans on my 64 Fleetwood. When it gets warm and up to temp, I loose 3rd gear, but I never loose reverse. According to multiple sources,…Continue

New Holley, but which one?

Started by Henrik Sonne in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Tuesday. 14 Replies

First I will start by saying, I am a newbie. Recently purchased a ´56 HT, which has a 390" from a ´63 in it. I have decided to put a new Holley on it, but not 100% sure which one would be the best…Continue

Shock absorbers and bolts

Started by Sammy in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Time again to change my shocks. No matter if Gabriel,  ACDelco whatever - don't last longer than 3 or 4 years.Problem is the rubber parts thats gliding out of the bottom.But now I have another…Continue

Blog Posts


Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments

  Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine

in advance, thank you for your help.

Clock ‘64 DeVille

Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments

Is there still a member in the Detroit area that refurbishes clocks?

Matt VH

Spark Plug Heat Range

Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments

I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.

Here it is:


The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)  

The insulator…


Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 

I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…



  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service