As I prepare for the CLC Fall Festival next weekend, I find myself finishing up everything on my list that I wanted to get done ACCEPT the lower front grille.
Jason put together a SUPERB front grill for me several months ago and I have been afraid to tackle that job.
I have the whole weekend to get the lower grille out and put back in.
How hard of a job will it be? Looking for any tips and tricks, thank you!
Logan
Tags:
I would use plenty of PB Blaster getting the perimeter fasteners off the old one, use a bright headlamp, and just take your time.
Does the bumper need to come off? It looks like everything should come right out of there!
Shouldn't need to come off. I remove the entire assembly when parting a car. At works you might loose the upper bumper outer to inner fender "hanger" bracket from bottom and loosen the 4 large bumper bracket to frame bolts/nuts to the bumper assembly drop a bit but I don't think you need to drop the entire bumper. Someone may have experience replacing in place and can chime in and I will look at my 64 again later this evening.
Started by Scott Santora in Restoration Discussion. Last reply by Jason Edge 2 hours ago. 3 Replies 0 Likes
My car's paint code is 10, Ebony Black. Does anybody know if Eastwood's "Original Chassis Black Satin" is the correct engine compartment color? I only need to do some touch-up and at least for right…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 4 Replies 0 Likes
Since I purchased my 64 Fleetwood nearly a year ago, its had a transmission leak that has gradually gotten worse. Not to mention the intermittent no shift to third issue I have been struggling to…Continue
Started by Russ Austin in General Discussion. Last reply by Dennis P. DiBari 22 hours ago. 1 Reply 0 Likes
The 2025 63 64 Cadillac wall calendars have just been designed and ordered. I only order 50 and I sell out each year, so get yours early to guarantee a calendar.$15.00 plus shipping. Please email me…Continue
Started by Russ Austin in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
I picked up a batch of wiper blade refills. 18 inch refill set for $20.00 plus shipping.Please email me at russ@thecadishack.comContinue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
October 20, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2024 Created by Jason Edge. Powered by