Long story short, I've replaced brakes etc which don't work! Did everything and finally found out that some of my vacuum lines were disconnected do to cracked ends etc and I've noticed that one vacuum line is missing.

Could any of you owners of 1963 Cdillac with an AC Unit please take and post some photos of the vacuum lines coming out of the firewall and where they're connected to??
Would be great if you could take the air filter out of the carb for the better view!

Sincerely
Mack

Views: 773

Reply to This

Replies to This Discussion

A 63 shop manual is a must for you to own and browse through.  Page 13-18 if you have one.  They are readily available in ebay.

In the help tab, scroll to the vacuum diagrams.

I have that Book but I'd prefer some pics from the cars instead of diagrams that are not that specific

Vacuum Schematics are posted on our Help Page under Vacuum Schematics and Pictures  Scroll to 2nd page in the photo album, then go down 4 rows and click on diagram on the left.  Click Here for a direct link.  If you don't have a shop manual, it is a must, and I have a VG used original for $40 + s/h. Shoot me an email to jasonedge@nc.r.com with address if you need one.

Mack
What is it about the brakes that is not working ?
Were they ever working right before what you did ?
You need to be more specific so we can help

The only thing that is vacuum related to the brakes is the brake booster behind the master cylinder and the hose from the back of the intake manifold to that
You have a valve at the front of the brake booster also

I do not have a 63 so i cannot supply the pictures you are asking for
Sure they will be along soon

What is it the brakes are doing or not doing ?

Enjoy
I've replace the whole brake system ; disc brakes, booster, cylinder etc!
I've bled damn brakes 2,5 million times with dozen of different methods and I still have a sooooooft pedal!
I think it has to be vacuum problem because I doubt that brand new unit would be messed up...

I'll highly appreciate a photo of the vacuum lines in any 63 with AC unit.
If you have vacuum line leaking problems plug the vacuum line off the back of the intake manifold that goes into the cabin
You can address the leaking lines in the future when you have time
You need to seal off the engine from any air leaks ( vacuum leaks ) so it will run as it should
Check your vacuum advance at the dist to be sure it hold vacuum
At least the intake manifold and engine will be working as they should with those things done

Enjoy
The reason why I've posted that I see because two lines were totally disconnected and one was literally missing!
I've aske for the photo to make sure what it supposed be to donnected like!
I've posted couple of pic!
One is a mysterious vacuum line that I have no idea where it goes to (the very long and skinny one that comes out off the firewal)
Attachments:

The manifold vacuum fitting is missing a line that goes to the electrical connector block on the fire wall.  That vacuum line is what feeds the vacuum to the heat/AC system.

I've just installed that vacuum line. Still soft brake pedal.

I have one line that is loose and I have no idea where it's going...

Is there a color stripe on the loose hose?  If there is no color stripe that can be seen from the engine compartment(e.g. it has been replaced with a newer hose) , you need to get under the dash to see what it connects to? Otherwise we are just purely guessing. If you see it has say a specific color stripe and looks like an original hose, then it is a safe bet it is connected correctly on the inside of the firewall, and you can use the shop manual to determine what it connects to in the engine compartment. If you want to make absolutely sure, especially with a car that has obviously had vacuum lines chopped up, I would still get under the dash and trace hoses.

Taking a quick look at your photo, it looks like I see a hose running to your water control valve. It would be a yellow stripe if factory hose.  It also looks like perhaps you have one running to the Fast Idle control valve (blue striped). But it is hard to say, as I do not see the color of the stripes, and of course in 50+ years it is easy for anyone to just unplug a hose from one component and plug it to something else... simply because the hose reaches!

Also keep in mind that a problem with posting actual pictures is I would say 90% of the cars I have brought in,  running and non-running, and every driver car, has hoses either disconnected or running to the wrong component.  For most cars, hoses get disconnected, switched around, and replaced with 50+ years of maintenance. 

So if you or anyone is looking for reference to correct hose hook-up, the diagram below is the best way to start the process. It shows hoses from component to component as it was assembled from the factory.

IF...and that is a very big IF, you want actual pictures you need to preface the question and ask "Does anyone have actual pictures of all the vacuum lines that are connected 100% correctly?"  I can easily show you a 1/2 doesn't 63 engine compartments with INCORRECT vacuum lines. If someone has went through the process and validated everything is 100% on their 63 (or 64) that would be fantastic. I would still probably be a bit anal and want to go back to the shop manual and validate everything, just to make absolutely sure it is 100% correct.  Putting together an album with all the intricate details of every vacuum line is on my to do list (if no one gets to it first), so we have actual pictures to go along with the vacuum schematics.

63withACvacuum 

Here's the loose vacuum line coming out of the firewall!
No stripes on it, it's super long and very skinny.
Attachments:
Another question is - what if the intake manifold has a crack somewhere? Would it affect the vacuum?

RSS

Photos

  • Add Photos
  • View All

Forum

Ordering Polyurethane Replacement Trailing Arm Bushings

Started by Dan McNarry in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 8 hours ago. 2 Replies

There seems to be growing interest in the poly bushings. In order for me to keep track of who wants bushings, please send me a message along with or in lieu of a reply to either this thread or the…Continue

bucket seat covers

Started by Joseph Pagliuca in Wanted to Buy. Last reply by Bobby Brown 10 hours ago. 3 Replies

looking for leather seat covers for bucket seats In a 1964 Cadillac Eldorado convertibleContinue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 10 hours ago. 177 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

How to sensibly deal with the Corona Virus

Posted by Jeff Kinzler on March 14, 2020 at 5:02pm 6 Comments

https://theamericanscholar.org/covid-19-a-primer/

I found this very helpful, written by a knowledgeable authority in public health. 

Remember, Viruses are not spread by Cadillacs so get out and drive!


Safe & Healthy travels. 

Jeff Kinzler

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 1 Comment

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service