Join me in welcoming our newest 1963/64 Cadillac Chapter Member
from Winston Salem, NC
Matt and his dad Les own the 1963 Eldorado which we featured in the Newsletter seen below. Les has been a CLC and Chapter member for some time and have been encouraging Matt to also join and am very glad to see that he is now part of the club!!
Here are a couple of pictures of Les and Matt and their 63 Eldorado
After battling with my original trans for several years. Leaks, Shifter getting locked up internally, Torus Seals, More leaks, and finally a professional rebuild that lasted about 3000 trouble free…Continue
I have the 63 cdv, with the flash assister on the dash,
My hi lo beams flash back and forth intermittently. sometimes they dont start flashing at all, sometimes they will just start flasihing on and off until I hit the button on the floor to get them to stop. sometimes they sound someone is down there hitting the floor button but the lights dont respond, you can hear the click but nothing happens, as if I have no control over that floor button. I have turned off…
At long last I finally have power vent windows! I started collecting the parts 3 years ago. The one thing I could not find until recently is the 6 button driver's switch. Jason finally pulled one in and was more than generous with pricing. Thanks Jason! Installing the vent window motors was the easiest part of the project but many other tasks were spawned by this project.
There is a hole in the door panels where the window crank was. I considered putting a hub cap emblem there…
I need to pull my distributor, and still have the cork in the end of the crankshaft. What is the bolt size needed to thread a bolt in there to be able to turn the motor over with a pull handle and socket to get it to TDC exactly before I pull the distributor out?