I have added this new Discussion Forum to welcome our newest Chapter Members as they sign up.

If you would like to join the Cadillac LaSalle Club or our Chapter
Click on www.join.6364cadillac.com for more information.

 

Views: 4973

Reply to This

Replies to This Discussion

Mike, how the hearse doing?

Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Derek Tucker
from  Burbank, California
       
Derek adds a 1963 Series 62 Convertible
to our fleet of Chapter Cadillacs

Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Matt Eastling
from  Winston Salem, NC
       
Matt and his dad Les own the 1963 Eldorado which we featured in the Newsletter seen below.  Les has been a CLC and Chapter member for some time and have been encouraging Matt to also join and am very glad to see that he is now part of the club!!

Here are a couple of pictures of Les and Matt and their 63 Eldorado
 
Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Jeff Skaife
from  Madison, Wisconsin
Jeff adds a 1963 Series 62 Convertible
to our fleet of Chapter Cadillacs

Thanks for the add, I've had a lifelong obsession with Cadillacs

Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Joe Vanacore
from  Mahwah, New Jersey
Joe adds a 1963 Series 62 Convertible
to our fleet of Chapter Cadillacs

Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Christian Peterson
from Genoa City, Wisconsin
Christian adds a 1964 6 Window Sedan DeVille
to our fleet of 63 & 64 Cadillacs

Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Russ Candell
from  Swedesboro, New Jersey
       
Russ adds a 1963 Series Eldorado Biarritz
to our fleet of Chapter Cadillacs

Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Marc & Dee Woodward
from  Albermarle, North Carolina
       
Marc & Dee add a 1964 Fleetwood 60 Special
to our fleet of 63 & 64 Cadillacs.

They are also members of our local Carolina Region so it is cool to see them also joining our 63/64 Chapter with the addition of his new 64 Fleetwood to their own Fleet of Cadillacs! 


Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Stephen Clarke
from  Scotch Plains, New Jersey
       
Stephen adds a 1963 Series 62 Convertible
to our fleet of Chapter Cadillacs

Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Latha Gearheart
from  Clinton, South Carolina
       
Latha adds a 1964 Fleetwood 60 Special
to our fleet of 63 & 64 Cadillacs.


Join me in welcoming our newest 1963/64 Cadillac Chapter Member
Brian Wiseman
from Gilbert, Arizona
       
 Brian adds a 1964 DeVille Convertible
to our fleet of 63 & 64 Cadillacs.

RSS

Photos

  • Add Photos
  • View All

Forum

Neutral Switch issues

Started by Rob Shatsnider in Restoration Discussion. Last reply by Mark S Anderson 19 minutes ago. 1 Reply

On a 1964 60 Special with a tilt wheel, tubro trans and #653 neutral switch.  When I had the transmission done the switch got out of alignment.  Now the car will start in Park, but not in Neutral,…Continue

Tags: issues, Switch, Neutral

New Batch of Embroidered Iron-On 1963/64 Cadillac Chapter Patches - $4 each

Started by Jason Edge in Chapter Discussion. Last reply by mark zimmerman 44 minutes ago. 9 Replies

As noted in our August 1963/64 Cadillac Chapter Newsletter:Around 6 years…Continue

Tags: Available, Patches, Chapter, Cadillac, 1963/64

Very sensitive brakes.

Started by Phil in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 2 hours ago. 19 Replies

Hey everyone,  how sensitive should the power brakes be?  I have just rebuilt the power booster and  replaced the master cylinder. The pedal doesn’t have any resistance so I have to be very gentle so…Continue

Carpet install

Started by Pete Grodem in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 1 Reply

simple question, Does the carpet go under the seat mounts and bolted down with the seat? My original carpet was cut to go around the seat mounts looks like a hack job. Same with the steering column,…Continue

Blog Posts

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow

V.I.N. where?

Posted by Robert Pellow on April 18, 2021 at 1:41pm 6 Comments

Where can I find the V.I.N. on a 63 convertible?  The usual space at the base of the interior windshield on the driver's side has been decimated by weather.

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service