I now sell the polyurethane bushings and steel adaptor for the rear lower control arms. 58-64 Cadillacs.
You need this to solve a vibration in the driveline. The problem is the rear bushing in the rear lower control arm. The bushing flexes from the spring pushing down on the control arm. Even the new China bushings flex after a year.
The flexing causes the pinion angle to change resulting in a drive shaft vibration. The pinion angle flex gets worse under acceleration.
The new polyurethane does not flex, so the problem is solved. I have this in my own 63 and it solved a vibration I was chasing for a few years.
The steel adaptor goes in place of the old original bushing, and the poly bushings go into the steel adaptor.
email me to get yours mailed out. russ@thecadishack.com
125.00 plus shipping.
Check out my web site for more great parts, both new and used. http://www.thecadishack.com

Views: 189

Reply to This

Replies to This Discussion


These new bushings are a very very important step in the right direction to be getting —- our stock —rear control arm bushing —-replaced with a more reliable part than has been available to our communities for a lgood number of years 

 Finally a solution to keep the stock control arms working as they should for more than  600 miles after replacement which was the only other short lived option for too long 
This is a serious break thru for the community 

Nice work my friend 


I’m currently using these,  they work excellent.  


How long and how many miles— do you currently have on the bushings that Russ now has available ? 

The issues with these bushings is there longevity or lack of it in the past — which we only  know and learn by  repair trail and error with new available  replacement parts for our great Cadillacs 
We need to know what works and what does not for restoration  replacement parts as stock  bushings are no longer available 

Feed back  and communication here is the only way we know the scoop on replacement parts  that work that are available in 2022 for our 63-64 Cadillacs to keep them rolling 

Solving  reliable replacement  out of stock part issues is one hell of a big deal to me and this community 

Getting it done with some feedback from our fellow Cadillac friends is how this  kind of a thing will get repaired once and fix the issue as it should for the length of time it should 

These problems getting solved that have not had any solution for a few years on this site is very very exciting to me and makes me have hope for the future performance  of my 64 convert 

Nice work guys !! 

I installed them about 2 years ago and I think I’ve put about 1000 miles on them.  The look as good as the day they were installed.  One good thing about them is once the sleeve is installed the bushing replacement is easy if it ever has to be done in the future, and the replacement is readily available.  


That is very good news and thanks for your feed back and experience 



  • Add Photos
  • View All


Dino Waiting on Battery!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies

This past Tuesday I realized I had not cranked Dino, my 64 CDV in a few…Continue

Tags: replacement, battery

People and our year Cadillacs

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion. Last reply by C. Van Tune yesterday. 1 Reply

So I am doing 5 miles an hour in a parking lot As the window of a car going the other way—-  passes  by my drivers  window the guy yells 61  loud !! —-( some what surprising me so loud ) ———and I…Continue

intake manifold gasket from olsen

Started by austin Rock in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Friday. 3 Replies

hi guys im a new 64 caddy owner and im having vaccumm leaks from the intake manifold. i took the manifold off today and it has cracks on it. my question here is, with the olsen gaskets with block off…Continue


Started by Michael Francioni in Wanted to Buy. Last reply by Michael Francioni on Friday. 2 Replies

Anyone have a turbo hydra matic transmission oil pump assembly?Continue

Blog Posts

Need help with a hood latch

Posted by Curtis Dover on January 2, 2023 at 5:23pm 0 Comments

Hey guys, I need some help.  Could someone send me some pictures on how the first hood release lever on a factory 1964 Cadillac is set up, where it comes though the grille. Not the secondary one. I need to know where the thumb or finger position is located through the grille. Is it above or below the center grille molding piece? Mine seems to be positioned behind the center molding piece and will not adjust above or below the molding. I have a wire tied to it to release it…


Oil pump

Posted by Ray Schick on October 30, 2022 at 4:34pm 4 Comments

I removed the front cover to change out the timing chain & gears all that went pretty well when I put the cover back on I put in a fresh oil filter ,filled it up figured it would be enough to prime the oil pump when I started the car .Fired up the car and heard lifters rattling, So I shut the car down right away. So I removed the oil filter housing, and poured oil down the neck of the oil pump housing filled it up and filled up the filter put it all together and fired it up and same…


Available parts

Posted by Thomas Reichenberger on October 13, 2022 at 11:47pm 0 Comments

Caddy members, I’m upgrading my 64 2-door coupe deville.

motor guy lost my block (machine shop went under) so I’m replacing motor & tranny with LS conversion. I have motor parts (other than block) for 429, rebuilt transmission, converter, and too many other motor parts not needed with fully dressed LS going in.

Email me (Tom.reichenberger@ipsper.com) or call me (210-739-4854) if you’re interested…..I live in San Antonio, TX.

thanks, TX…


Trunk Open and Lock Mechanism is in Closed Position

Posted by Chris Anderson on September 13, 2022 at 7:14pm 7 Comments

While working on my trunk lock on 64 Cadillac, I mistakenly closed the locking mechanism while the trunk was open.  Is there an easy way to manually release the lock back to the open position?



  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service