Is it possible to use Edlebrock main jets and needles in a Carter AFB Carburettor. My 64 Coupe Deville runs duel straight through exhaust and this makes the mixture week in mid range and top end. How can I improve fuelling. 

Views: 95

Attachments:

Reply to This

Replies to This Discussion

Edelbrock rods & jets fit.

Thanks. That's good news for me

Robin 

Do this — Call the Edelbrock techs  regarding your problem 

Give them the numbers on you primary  and secondary jets and your metering rods 

The parts are the same for both carbs 

You will find they are very very helpful  “performance guys “

You will need to be checking your spark plug color after your adjustments 

Your mixture WB right when your plugs burn a brown paper bag color 

I would do a complete tune including ign wires to have the engine on tune spec ( vacuum issue free ) and then do the jetting as I did do on my own 64 429 

Enjoy 

Thanks Bud

Robin, if you are dead serious on getting the mixture right and the car tuned perfectly, pick up an Edelbrock air to fuel mixture monitor. https://www.summitracing.com/parts/edl-6593?seid=srese1&gclid=E...

I put a bung in my 63 and 72 chevy truck.

Yes I have bin thinking about that. Looks the way to go. Thanks Bud

I deleted two of my posts 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 2 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

64 SDV axle bearings

Started by Chris Cheveau in 1963/64 Cadillac Specific Discussion. Last reply by Anders 8 hours ago. 1 Reply

Hi all,So I put new axle bearings on my 64 SDV, took for a drive and rumbling sound was worse that before and bearing was leaking.Question: Is there supposed to be an oil seal between axle housing…Continue

wanted, how remove front seat and 6 way seat tranny

Started by john kilbourne in General Discussion. Last reply by Russ Austin yesterday. 3 Replies

any information or video would be greatly 'ppreciated!JKContinue

Locating radial tires for a stock 64 convert rim

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion. Last reply by Ray Schick yesterday. 8 Replies

Did some looking around to see where i could find some new 265 75r 15  radial tires for the 64 convert The current radial I have on the car I was  very surprised to see the size has become a problem…Continue

Tags: stock, rim, 64, a, tires

Blog Posts

Website

Posted by Fritz Seitz on August 11, 2020 at 2:35am 0 Comments

I have been working on a website-----www.fritzsautorepair.com-----

Does anyone have suggestions?

Electrical

Posted by Anthony Boles on August 8, 2020 at 5:46pm 5 Comments

My 1964 Cadillac electrical system is running around 17 volt which is to high,the alternator, battery and the voltage regulator was replaced but the voltage is still to high, could it be the pig tail that plugs into the voltage regulator. 

63 Caddy Horn

Posted by Robert Alan Shannon on May 27, 2020 at 9:25am 10 Comments

 Just noticed a 1963  Caddy trumpet horn on Ebay. No part # given but some of his other items are 1963 specific, just throwin this out there, I have no connection to this listing .

Wiring connection help.

Posted by Jimmy Davis on May 24, 2020 at 9:15pm 2 Comments

Can someone help me figure where these connections go? I have a 64 60 special if it matters.…



Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service