I am in the process of removing the belt trim on the doors of my Fleetwood.  I need to find the rear door window stop location so that i can remove screws. Help.

Also, I am replacing the vent window gears.  Any suggestions before I take apart the mechanisms?.

Thank you.

Stephen Pechenik

Views: 67

Reply to This

Replies to This Discussion

I forgot to mention that I am looking for a rust free inner fender for the passenger side front fender'  Please let me know if anyone can fulfill this request.

Also, I have a 1964 passenger side front (rust free)  fender That the seller assured me was for a 1963.  I have no use for it.  Let me know if anyone is interested.  I can furnish you with photos.

Thank you

I have the inner fender for you, please send me an email; russ@thecadishack.com 

Take the door panel off and the shop manual will point out the window stops. 

I replied to your email. 

Stephen, did you get my email?  I will put the part away if I dont hear back from you. 

Stephen, Is it a fender off a Fleetwood or a Sedan DeVille with the holes in it for the trim ?

Dear Chris,

The right front fender is from a non-Fleetwood model.  There are no holes drilled for the "FLEETWOOD" script.  I'll take some photos tomorrow and will send them to you.

Dear Chris,

I purchased the fender at the Hershey swap meet this past October.  Somehow I forgot that it IS A FLEETWOOD FENDER.  It is drilled for the Fleetwood lettering.  That was my main reason for purchasing it for my 1963 Fleetwood. 

I ran to my garage and took some photos.  Although there is surface rust, the metal is thick and with the exception of a spot on the bottom behind the wheel and tire, is dent free. Let me know if you need more.  I was in a hurry today.  I have to return tomorrow to look at the parts I need to replace. 

I await your advice. 

Stephen Pechenik

Dear Chris,

I am having trouble navigating this website.  I tried to respond to you before to inform you that the Fender is off a 64 Fleetwood.  I took some photos but need your e-mail to send them.  Send me an e-mail at SPechenik@gmail.com

Thanik you.

RSS

Photos

  • Add Photos
  • View All

Forum

How to keep my soft top in good condition?

Started by Remco Waller in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith 5 minutes ago. 1 Reply

Hi, I own a 1964 Eldorado convertible since last August and would love to get some input what the best way is to keep my soft top in good conditions.Which materials to use to clean / preserve the…Continue

Vendor to refurbish my electrical antenna

Started by Remco Waller in 1963/64 Cadillac Specific Discussion. Last reply by Rob Nance 52 minutes ago. 2 Replies

Hi, I own a 1964 Eldorado and the electrical antenna is no longer working smoothly and get sometimes stuck so like to refurbish it; who can help with a good vendor to do this.Remco WallerContinue

No Privacy... Even on the Moon!

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Tuesday. 1 Reply

You will never guess what the Artemis II Orion spacecraft crew found parked on the back side of the Moon yesterday - DINO!  And I thought I had found the perfect private parking spot!…Continue

Clock Repair

Started by Michael Vogler in General Discussion. Last reply by Dennis P. DiBari Mar 22. 6 Replies

63/63 Owners,The clock in my '64 just went out. It appears that the mechanical component is working properly, so I think the coil has failed. I contacted Jerry at Clockworks and he advised that he…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service