anyone know of a company that makes the rear glass for our cars? I can’t seem to find any. 

1964 4 door 4 window hard top.

Views: 98

Reply to This

Replies to This Discussion

There is someone on eBay that sells windshield glass for our year cars 

I would contact them for your needs 

That would be new manufactured glass 

The new glass is slightly thinner they make today 

Another option might be very good used glass which may be available possibly right here 

All relative to how difficult it may be to get what you need I would think 


There is something very special about the LOOK of  our cars when dropped with the Mag wheels 

Makes for a very interesting custom Hot Rod look that I am sure is a traffic stopper 


It’s getting a lot of work done... the original guys won’t like it but 

All vacuum stuff is gone.

Re wired the whole car.  

New rubber

Two batteries in the trunk with the tanks and compressors 

New window motors 


Wow! I love the suicide doors. That is way cool! Just to note, there are some of us that swing both ways... car wise. I've been restoring my 64 CDV to original for 2 decades but love the custom stuff. I appreciate any and all good work. It is my one driver 63/64 and had to decide which direction to take it ... so I decided to take it factory but add options that were available such as power vents, posi rear, tilt column, am/fm, etc. It do have the Pertronix III and Edelbrock 750 cfm on the engine. If and when I get another "driver" 63 or 64, I'm going to definitely do some custom stuff. I would love to have an LS series engine in one of these.. .especially something like the LQ9 in my 2002 Escalade or the L92 in the later Escalades. Be sure to post more pictures as the work progresses.

David, As noted in my email I have about 15 of the 4 Window Sedan (6239, 6339) rear windows and sell for $125 + s/h.  Shipping is not cheap and have provided a total with shipping in the email. For anyone traveling through North Carolina that needs front or rear glass, I have a lot of rear windows and front windshields in VG condition for all body styles except the 75 Series/Limos. 

Jason is the man you want to be seeing about your glass if at all possible 

The right part in the right condition is a given with this gentleman 


I have glass for 100.00 and I'm in Arizona. I do ship anywhere.    email me at

Do show the hinges for the rear door. Often wondered how it would be done.

I couldn’t find a picture of the hinge before it was put in but here is one I found after it was put in. They are 1/2” steel so don’t have to worry about sagging. Also put bear claw latches on both the front and back doors for super easy opening/closing. 

First of its kind as far as I can tell. I’ll get more pictures up soon. Have the interrior going in next week hopefully. I like the patina so going to clean it up and cruise it like it is. Maybe paint it in a couple years. 


First time I have seen suicide doors on our year cars —a  great look for a custom ride 

Do  pls explain how this was done 


If Russ is easier to get to than Jason.   ( due to location - LOL ! )    he also is a wonderful person to be doing business with for our car parts 

These guys are —-very highly recommended experts on the subject of our cars and will do the right thing for a customer 

Gotta love this place if you are the lucky owner of one of our great  Classic Antique Cadillac rides 

These cars make you Cooler than you would be otherwise — case closed !! 


And Jason really, really, really doesn't mind Russ taking this sale.. these things are a major (insert pleasantries here) to pack.  These 4W sedan rear glasses can just fit in the max size box but you have to pad and secure them very well to make sure they arrive as one piece of glass.  At least the 6W sedan rear glass is a flatter glass..although about the same width and height.



  • Add Photos
  • View All


1963 Cadillac Convertible Door Jamb Switch

Started by Lee Martin in 1963/64 Cadillac Specific Discussion. Last reply by Lee Martin 12 hours ago. 3 Replies

Okay, it's "dumb question time!"  Here's mine:  Does anyone know the part number for the 63 convertible door jamb switch (3 prong)?  I cannot find this in the manual...thanks!Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Rear main Follow up replacement and repair,,

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kim K Kaiser on Thursday. 38 Replies

Well, got it all together,, Jason, i was looking in the wrong chapter in the manual on the starter,, got that figured out.  everything hooked back upGot it put back together, started up, and oil…Continue


Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 10 Replies

IN addition to the main seal leak,,which i am going to tackle again tomorrow,i also have a leak in what seems to be the steering gear.  I have checked to connections from the pump, and its dry on…Continue

Blog Posts

driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!


Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…


Carter AFB carburetor question

Posted by Ray Schick on October 7, 2019 at 8:29pm 8 Comments

3655S carb, and a 3656S carb .I know the difference is one is for A/C and the other in for a non A/C car . Now the question is : can I use the carb bowl from the A/C car on the non A/C car ? They look the same set up next to each other


  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service