Has anyone replaced any/all of these parts? If so, where did you buy them? Also, and most importantly, did replacing them change any characteristic of the car, like maybe reduce driveline vibration?
Thanks
Norm
Tags:
Norm, I did a full rear end suspension upgrade this summer. I did replace the bushings and spherical joint on the rear yoke. Also replaced front and back bushings on the rear trailing arms along with the springs and shocks. For the back bushing on the trailing arms along I got a poly bushing with aluminum sleeve from Dan McNarry( chapter member). I highly recommend these as the original type bushings wear out rather quickly and the poly’s help the driveline! All the other bushings and spherical joint I bot on Rock Auto or Caddy Daddy. WARNING: when replacing the spherical joint do not use the bolts, washers and nuts that come with it. Go buy matching size grade 8 parts, don’t ask how I know this!
Norm,
I bought the rear ball joint part from Rare Parts Steering and Suspension. I paid a neighborhood mechanic to install it given its location, the need for grinding et cetera. I can't say whether or not it affected the ride of the car as I had also replaced most of the other suspension components and I had no driveshaft vibration before or after. I do know the mechanic did not enjoy the process of replacing the part.
https://www.rareparts.com/search?make=Cadillac&model=DeVille&am...
The forum does have at least one lengthy discussion about the trailing arms.
https://6364cadillac.ning.com/forum/topics/rear-trailing-arm-bushin...
There may be more commentary.
hth
Chris
Thank you , Chris. I have not replaced anything back there yet because I have not really inspected things as closely as I need to-but I suspect the car probably needs something refreshed in the rear suspension.
Also, THANK YOU SO MUCH for the link regarding the discussion. I am absolutely helpless when it comes to finding things on any website. I'm just an analog guy catapulted in to a digital world-and not liking it.
Norm
Thank you, Dave!
I'm not even sure I need this stuff, but suspect at least one part of something back there is worn as I sometimes get a "groan" out of the rear on sharp turns.
Norm
Started by Jason Edge in Trivia 13 hours ago. 0 Replies 0 Likes
It has been way too long since we posted any trivia (and gave out a cigar), so here is one I thought I might have posted but do not see it: What % of 1963 Cadillacs came with the optional "Controlled…Continue
Started by Jason Edge in For Sale. Last reply by Jason Edge 22 hours ago. 2 Replies 0 Likes
I had an older couple contact me indicating they are selling their 1963 Coupe de Ville they have had for 40 years and they are located Moyock, NC, which is in the very north east part of North…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Thursday. 15 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
I hope our US members had a great Thanksgiving and all members are ready for the holiday season. You probably noticed we went back to a more basic header on the website (in desktop mode). I had…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
December 14, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by