Recently purchased a 63 series 62 and it was not optioned with rear seat belts. i just purchased 4 new seat belts. the rears are easy as cake but the fronts i cant get them out of the center area of the seat!

the ones nearest to the doors are easy but the ones that go "inside: the seat seem to go in a small grove and out the center. does the seat need to come apart?

hope my description makes sense. thanks for the help!

Views: 167

Reply to This

Replies to This Discussion

Seat does not come apart
The side with the heavy latch ,slides through the seat to a bolt hole in the floor
Mine are on either side of the front arm rest
Was it possible to get a car without any seat belts ? Mine don't..

My 64 hearse only had the rubber plugs, no belts.

Seat belts were an option

Rear Seat belts were an option for all of 1963 and 1964.

Front Seat belts were on option on all 1963's, and an option on 1964's only up to a point when they switched over and became optional after Engine (VIN) Number 57000.  It is in the January 1964 Serviceman Bulletin page 8 available from our Literature Page.

Click Here for a direct link to the page.

Regardless pre-drilled holes are in the front and back floor boards, filled with rubber plugs when not used. Check the pictures in the Seat Belt page access from our Help Topics page for location references.

RSS

Photos

  • Add Photos
  • View All

Forum

Power Brake Booster

Started by Stephen A. Pechenik in General Discussion. Last reply by Stephen A. Pechenik 48 minutes ago. 5 Replies

Hello Co-Members,I recently purchased a  low mileage1963 Sedan Deville Park Avenue.  It is extremely solid and runs well.  Neverthelss, it has minor problems that need to be addressed before I can…Continue

Jeremy LeBlanc

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 9 hours ago. 4 Replies

Jeremy I am very interested in learning all you can tell me and the community about your engine swap to the 2019 LS2 L96 Silverado engine and 6L90 trans you installed in your 63Any details you could…Continue

Tags: 63, to, swap, engine, Silverado

Dan McNarry

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 10 hours ago. 5 Replies

Dan Have you come up with any solution for the front bushings of the rear trailing arms of our year cars ?I thought you had suggested you were thinking about what you might do about that Stay Safe Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 22 hours ago. 178 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

1964 Cadillac fleetwood sixty special vanilla top windshield needed

Posted by Pablo on April 5, 2020 at 10:00pm 3 Comments

If anybody has or know where Can I get a windshield glass for my 1964 Cadillac fleetwood sixty special with vinyl  top? I will appreciate any info.

Thank you very much

How to sensibly deal with the Corona Virus

Posted by Jeff Kinzler on March 14, 2020 at 5:02pm 6 Comments

https://theamericanscholar.org/covid-19-a-primer/

I found this very helpful, written by a knowledgeable authority in public health. 

Remember, Viruses are not spread by Cadillacs so get out and drive!


Safe & Healthy travels. 

Jeff Kinzler

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 1 Comment

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service