I have a 64 and the timing is to far advanced  the vacuum advance hits the valve cover I think this is a result of my father in law having a timing chain put on years ago what is the best remedy ? Pull out housing and reposition it ? Also trying to figure out if maybe they installed the wires  wrong  where exactly should rotor be pointing on TDC ?  and is it possible if it was installed off  that the wires could of been moved on the cap  to make it run .have had this car 27 years and always runs hot and won't start till the engine cools down ( like it is to far advanced  haven't thrown a light on it yet I am doing my homework so when I tackle it I am prepared  I have seen the diagrams here but doesn't really show  clock position of rotor on tdc  any advise is appreciated 

Views: 428

Reply to This

Replies to This Discussion

 I am getting it in shape to sell I am nearing retirement and going to be moving  and won't have a place to keep it  Thanks for the info 

What one would be a 4 door hard top  62 Sedan ?

Steve
The 4 door would be a Sedan
The engine in 64 - WB a 429 and have the hydramatic trans behind it in the Sedan model
The 390 and 429 look the same in the engine bay as the internals of the 429 are stroked to increase cubic inches
There are 4 and 6 window Sedans in 64

If you post pictures --and what you are looking for regarding price -you may develope some interest in the car here -if seliing the car is the direction you choose to go with it

You might want to get it -road worthy and see if this is something you might enjoy to drive and continue to own and restore
These cars are a very unnique driving experiences
You might be very surprised at the attention and interest in these cars these days when out and about
The interest in the car will be --surprising once you get it out on the road and are using it to enjoy the day
Many will spend hours and dollars restoring a car like this ( which has its frustrating moments ) only to realize it is driving the car and the enjoyment it brings on so many levels that makes up for the blood sweet and tears that go into the restoration process
It does help a lot to be able to do a lot of the wrenching --youself And have the space tools and be willing to invest the time and money the hobby will requires

Enjoy

One of the very best TOOLS  to work on these cars is a shop manual for your year car 

RSS

Photos

  • Add Photos
  • View All

Forum

1964 429 CARB SUGGESTION?

Started by Rob Bonello in 1963/64 Cadillac Specific Discussion. Last reply by Rob Bonello 4 hours ago. 2 Replies

Need to replace the carb on my 64 (429cu). Don't want to rebuild it and looking for suggestions on something quick and easy/bolt-on. What are you guys/gals using, besides stock rebuilds?…Continue

Tags: carburator, 429, carb, deville, coupe

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 12 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Mpg

Started by Joe DiIaconi in General Discussion. Last reply by Tony and Ginny 429 on Monday. 8 Replies

Hello all. I live in South Florida, yesterday I drove down to islandmorada in the Florida Keys and it took me a half a tank of gas to get there. It took me a quarter of a tank to get back.Any ideas…Continue

Blog Posts

63 Caddy Horn

Posted by Robert Alan Shannon on May 27, 2020 at 9:25am 10 Comments

 Just noticed a 1963  Caddy trumpet horn on Ebay. No part # given but some of his other items are 1963 specific, just throwin this out there, I have no connection to this listing .

Wiring connection help.

Posted by Jimmy Davis on May 24, 2020 at 9:15pm 2 Comments

Can someone help me figure where these connections go? I have a 64 60 special if it matters.…



Continue

Wood grain finally done.

Posted by Jimmy Davis on May 20, 2020 at 4:57pm 3 Comments

After years of wanting to, I finally redid my wood dash paneling on my 64 60s. Not too hard to do either.…

Continue

390 engine replacement needed

Posted by Jason on May 18, 2020 at 7:54pm 1 Comment

I’m looking for a 1963 Cadillac 390 engine that runs. 

Events

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service