Hello All,

Took the car in for front end alignment and car remains at facility. The tech drove the car into bay and returned it to the same spot that I drove into. Paid for work and was ready to drive home: when I got in the driver seat noticed the gear shifter was not in park position, but down in reverse "R". Tried to move it up to proper position to start and get out of there. Nothing doing could only get the shifter to go to drive "D", no further. Stormed back into the office and asked when were they planning on telling me the tech broke something on my car. Argruments and alot of finger pointing and I left the car for them to figure how they would like to handle the issue. The car is a 6200 series, 1963 has anyone else ever had this type of issue or know anyway that it can be resolved. I do know at some point I will have to assist them in getting the car taken care of. Any help will be gladly appreciated.

Views: 299

Reply to This

Replies to This Discussion

Glad I can help Ron .

Find out where the lever ——that came out —looks like it belongs 

Hold it in place any way you might 

Reattach it where it looks like it belongs  if possible and see if that helps to correct your finding a correct gear issue on the column 

Enjoy 

Anything positive going on with the gear shift problem ?

Enjoy

Hey Tony!!,

I filed claim with Firestone Corporate, did not want to deal with local or regional. Seemed to me they were trying to wash their hands of the problem and put everything back on me. I speak to a claims specialist tomorow. Once we get it to tranny shop will pass along all the pertinent information to them should they need it. Just horribly madd and upset, something so simple gone so bad!! Keep you all posted

Many Thanks,

Hello All,

Took the car to one of the premier Caddy dismantlers and service departments in my area. Mark was right on point with the part that needs to be replaced the "inside detent control and set screw" along with the "detent spring and roller assembly and attaching screw" on the inside of the tranny. Now that we have the parts targeted and know what we need; we are having trouble locating them so the saga continues. Thanks for all the support along the way the information saved a ton of labor time narrowing down the problem. Hopefully can track down the parts and have a good long cruise before sumer ends!!

Ron

There are a couple of good parts guys posting here who must have a core hydramatic sitting around, so you've got a good shot at getting what you need easily.   These are simple parts to remove, just a little messy to open the pan.
The roller detent spring is still available, I'm pretty sure, from Fatsco transmission parts in New Jersey (they're awesome, btw).  They may also have the detent assembly, but I never needed one so I can't say they do.

You're very lucky if it didn't knock the end off of the manual valve when it broke.  That would require dropping the valve body, and a lot more parts scrounging and expense.

I took a car to an upholstery shop for some interior work.  When I went to pick it up, the shifter wouldn't find a detent to stay in gear.  The detent spring and roller broke, and it had nothing to do with the shop.  Sounds like the same thing with you. cant be blaming a shop for a 50 plus year old part breaking on them.

On a good note, I should have the detent roller.  Send me an email to  russ85747@hotmail.com 

Russ is surely the bottom line  right answer to this broken shifter issue especially having had the same experience himself 

Always glad that man is on this site for years 

Never heard of the those parts before but good to know  it’s not to bad a repair to attack 

Enjoy 

Do let Russ help you acquire your parts 

Enjoy 

From a current thread regarding a trans gasket replacement on the site  right now 

The hardest part of replacing the parts for the shift lever detent —would be to get the pan gasket back on and not leak 

Perfect time to address trans filter needs and new fresh trans fluid 

Trans all better and prepped for the long haul 

Ron enjoy getting the car back and enjoying it again 

Enjoy 

Thanks Tony,

I was reading the threads on the tranny pan gasket!! Guess that's why there was 17 pounds of RTV caked all around the pan. Gonna be Fun!!

 Ron 

very glad you are getting  very close to getting back to driving your pride and joy again 

Enjoyed learning some very good info from this thread 

Always a FUN thing for me regarding my passion for  any and all knowledge regarding our year cars 

the joy my 64 Convertible has brought to my life  for 55 years is simply priceless for this confirmed Gear head 

Enjoy 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

Trivia Question 17 - Item You COULD NOT Delete Because of Cars Heater

Started by Jason Edge in Trivia. Last reply by Tony and Ginny 429 26 minutes ago. 6 Replies

OK. We had so much fun with the last Trivia regarding the car's heater, I thought we should post another heater related question.  So here goes:What item does the spec manual go out of its way to…Continue

Tags: Question, Trivia

Good Sources for Parts?

Started by Bob Ricks in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 6 hours ago. 1 Reply

New member here so be patient with me.  New owner of what I would consider a rat-rod 63 caddy.  Previous owner painted everything flat black, in an obvious attempt in covering up body deficiencies. …Continue

Trivia Question 16 - Standard Item You could Delete for Reduced Cost?

Started by Jason Edge in Trivia. Last reply by Tony and Ginny 429 12 hours ago. 21 Replies

OK. Here's a new trivia. There is at least one main standard (non-option) item that one could "delete" on a new 1963 or 1964 Cadillac for a reduced cost.  What is it?  For extra cigars, what is the…Continue

Custom '64 Eldorado on Bitchin' Rides Last Night

Started by Ian Osborne in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje 21 hours ago. 1 Reply

If anyone here is familiar with the show "Bitchin' Rides" they started work on a '64 Eldo on the episode that aired last night (12/5). I really like the show and they build some amazing custom…Continue

Blog Posts

still need a driveshaft

Posted by wayne weaver on November 26, 2019 at 11:53am 2 Comments

well thank you UPS for losing the driveshaft that Russ Austin shipped me. 

however i still need a rear driveshaft section for my 63. mine has a vibration due to the bushing inside of it. its a shame because the ball and sockets in the cardian joints are perfect but it has a woble on the balancing machine. so .  still need the rear section. anyone have a good one ? is there driveshaft alternatives to use ? i am really considering an LS swap and since im fighting the driveshaft search…

Continue

63 guidematic issues

Posted by maurice lapoiinte on November 24, 2019 at 3:10pm 0 Comments

 So my 63 guide matic headlamps stay on low beam all the time. I have so far bypassed the system and everything works normal. I have been thru the trouble shooting in the manual but this is where the confusion begins.on my car when the power relay is powered I have low beam and when its not powered I have highbeam, this appears to be opposite what the diagnosis says should be correct.The wiring is all original and no wires have been mixed up.has anyone ever unplugged the 2 wire connector…

Continue

Another advantage of the Pertronix III

Posted by Doug Scarrow on November 23, 2019 at 11:12am 1 Comment

   Having tried both the II and III I can say the multispark feature of the III offers a smoother idle . It is also easier to install .Does not require removal of the distributor

Stuck at two red (dash) lights!

Posted by Jeff Kinzler on November 3, 2019 at 10:00pm 9 Comments

I hope someone can help solve these two electrical problems that appeared one after the other.

By way of background: The car, a '64 Eldorado has very limited use. It was at a restoration shop for 15 months until last January-  that supposedly did a bunch of wiring repairs including rebuilding the gas gauge that still hasn't worked properly, and the clock that hasn't worked, and re-soldering the broken wires in the drive door. All window and seat controls appear to be…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service