Hello All,

Took the car in for front end alignment and car remains at facility. The tech drove the car into bay and returned it to the same spot that I drove into. Paid for work and was ready to drive home: when I got in the driver seat noticed the gear shifter was not in park position, but down in reverse "R". Tried to move it up to proper position to start and get out of there. Nothing doing could only get the shifter to go to drive "D", no further. Stormed back into the office and asked when were they planning on telling me the tech broke something on my car. Argruments and alot of finger pointing and I left the car for them to figure how they would like to handle the issue. The car is a 6200 series, 1963 has anyone else ever had this type of issue or know anyway that it can be resolved. I do know at some point I will have to assist them in getting the car taken care of. Any help will be gladly appreciated.

Views: 295

Reply to This

Replies to This Discussion

Glad I can help Ron .

Find out where the lever ——that came out —looks like it belongs 

Hold it in place any way you might 

Reattach it where it looks like it belongs  if possible and see if that helps to correct your finding a correct gear issue on the column 

Enjoy 

Anything positive going on with the gear shift problem ?

Enjoy

Hey Tony!!,

I filed claim with Firestone Corporate, did not want to deal with local or regional. Seemed to me they were trying to wash their hands of the problem and put everything back on me. I speak to a claims specialist tomorow. Once we get it to tranny shop will pass along all the pertinent information to them should they need it. Just horribly madd and upset, something so simple gone so bad!! Keep you all posted

Many Thanks,

Hello All,

Took the car to one of the premier Caddy dismantlers and service departments in my area. Mark was right on point with the part that needs to be replaced the "inside detent control and set screw" along with the "detent spring and roller assembly and attaching screw" on the inside of the tranny. Now that we have the parts targeted and know what we need; we are having trouble locating them so the saga continues. Thanks for all the support along the way the information saved a ton of labor time narrowing down the problem. Hopefully can track down the parts and have a good long cruise before sumer ends!!

Ron

There are a couple of good parts guys posting here who must have a core hydramatic sitting around, so you've got a good shot at getting what you need easily.   These are simple parts to remove, just a little messy to open the pan.
The roller detent spring is still available, I'm pretty sure, from Fatsco transmission parts in New Jersey (they're awesome, btw).  They may also have the detent assembly, but I never needed one so I can't say they do.

You're very lucky if it didn't knock the end off of the manual valve when it broke.  That would require dropping the valve body, and a lot more parts scrounging and expense.

I took a car to an upholstery shop for some interior work.  When I went to pick it up, the shifter wouldn't find a detent to stay in gear.  The detent spring and roller broke, and it had nothing to do with the shop.  Sounds like the same thing with you. cant be blaming a shop for a 50 plus year old part breaking on them.

On a good note, I should have the detent roller.  Send me an email to  russ85747@hotmail.com 

Russ is surely the bottom line  right answer to this broken shifter issue especially having had the same experience himself 

Always glad that man is on this site for years 

Never heard of the those parts before but good to know  it’s not to bad a repair to attack 

Enjoy 

Do let Russ help you acquire your parts 

Enjoy 

From a current thread regarding a trans gasket replacement on the site  right now 

The hardest part of replacing the parts for the shift lever detent —would be to get the pan gasket back on and not leak 

Perfect time to address trans filter needs and new fresh trans fluid 

Trans all better and prepped for the long haul 

Ron enjoy getting the car back and enjoying it again 

Enjoy 

Thanks Tony,

I was reading the threads on the tranny pan gasket!! Guess that's why there was 17 pounds of RTV caked all around the pan. Gonna be Fun!!

 Ron 

very glad you are getting  very close to getting back to driving your pride and joy again 

Enjoyed learning some very good info from this thread 

Always a FUN thing for me regarding my passion for  any and all knowledge regarding our year cars 

the joy my 64 Convertible has brought to my life  for 55 years is simply priceless for this confirmed Gear head 

Enjoy 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

F/S 1963/1964 Cadillac parts

Started by Bob Hoffmann in For Sale. Last reply by Russ Austin 1 hour ago. 7 Replies

1963 center bumper & license guard only.1964 front bumper complete, less license guard1964 lower grille1964 cornering lightsAll these parts are from a California car.1964 dash pad. black, great…Continue

1964 Twilight Sentinel

Started by Charles Fares in For Sale 1 hour ago. 0 Replies

Complete USED Twilight Sentinel from a low-mileage, dry California car.  All components and electrical connectors present, no cut wires, nothing damaged or missing. It's plug and play. Send me an…Continue

Re jetting Carter AFB

Started by Robin Evans in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 2 hours ago. 7 Replies

Is it possible to use Edlebrock main jets and needles in a Carter AFB Carburettor. My 64 Coupe Deville runs duel straight through exhaust and this makes the mixture week in mid range and top end. How…Continue

Tags: Duel, Exhaust:, Straight, through:, Fueling:

I need to buy rim for tire Los Angeles ca

Started by Charles in Wanted to Buy. Last reply by Charles 5 hours ago. 5 Replies

in need or rim for tire Cadillac Fleetwood 64 any one known why i can buy in Los Angeles ca ..hi..thanks 310 309 0332Continue

Blog Posts

Stuck at two red (dash) lights!

Posted by Jeff Kinzler on November 3, 2019 at 10:00pm 9 Comments

I hope someone can help solve these two electrical problems that appeared one after the other.

By way of background: The car, a '64 Eldorado has very limited use. It was at a restoration shop for 15 months until last January-  that supposedly did a bunch of wiring repairs including rebuilding the gas gauge that still hasn't worked properly, and the clock that hasn't worked, and re-soldering the broken wires in the drive door. All window and seat controls appear to be…

Continue

driveshaft help

Posted by wayne weaver on October 9, 2019 at 4:41pm 1 Comment

can anyone help me with a driveshaft ? I have a 1963 Cadillac 62 series 4dr with the hydro-matic trans. I need the male splined shaft on the front of the rear driveshaft section. the piece with the nut attached by clip.id be willing to buy a shaft if its not horribly priced.

Dash removal

Posted by Jake Mickley on October 9, 2019 at 12:06am 9 Comments

Hello everyone,

On a 63 CDV, if a guy wanted to remove the entire dash to get all the metal painted, and do some other things behind there, how would he go about doing that?  I checked here and the shop manual, but can't find a complete guide.

As always, and help or direction is appreciated.  Thanks!

--Jake

Introducing myself

Posted by Gary Marchand on October 7, 2019 at 9:32pm 8 Comments

Thanks for letting me join the club.  Picked up this ‘64 Coupe Deville a few months ago out of Beverly MA, the car has few stickers on it from various Cadillac clubs, didn’t know if anyone might recognize it from it’s “Glory days.” Everything seems pretty healthy except for the body and some very Mickey Mouse repairs, was wondering if anyone had any leads on…

Continue

Videos

  • Add Videos
  • View All

© 2019   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service