Hello All,

Took the car in for front end alignment and car remains at facility. The tech drove the car into bay and returned it to the same spot that I drove into. Paid for work and was ready to drive home: when I got in the driver seat noticed the gear shifter was not in park position, but down in reverse "R". Tried to move it up to proper position to start and get out of there. Nothing doing could only get the shifter to go to drive "D", no further. Stormed back into the office and asked when were they planning on telling me the tech broke something on my car. Argruments and alot of finger pointing and I left the car for them to figure how they would like to handle the issue. The car is a 6200 series, 1963 has anyone else ever had this type of issue or know anyway that it can be resolved. I do know at some point I will have to assist them in getting the car taken care of. Any help will be gladly appreciated.

Views: 339

Reply to This

Replies to This Discussion

Glad I can help Ron .

Find out where the lever ——that came out —looks like it belongs 

Hold it in place any way you might 

Reattach it where it looks like it belongs  if possible and see if that helps to correct your finding a correct gear issue on the column 

Enjoy 

Anything positive going on with the gear shift problem ?

Enjoy

Hey Tony!!,

I filed claim with Firestone Corporate, did not want to deal with local or regional. Seemed to me they were trying to wash their hands of the problem and put everything back on me. I speak to a claims specialist tomorow. Once we get it to tranny shop will pass along all the pertinent information to them should they need it. Just horribly madd and upset, something so simple gone so bad!! Keep you all posted

Many Thanks,

Hello All,

Took the car to one of the premier Caddy dismantlers and service departments in my area. Mark was right on point with the part that needs to be replaced the "inside detent control and set screw" along with the "detent spring and roller assembly and attaching screw" on the inside of the tranny. Now that we have the parts targeted and know what we need; we are having trouble locating them so the saga continues. Thanks for all the support along the way the information saved a ton of labor time narrowing down the problem. Hopefully can track down the parts and have a good long cruise before sumer ends!!

Ron

There are a couple of good parts guys posting here who must have a core hydramatic sitting around, so you've got a good shot at getting what you need easily.   These are simple parts to remove, just a little messy to open the pan.
The roller detent spring is still available, I'm pretty sure, from Fatsco transmission parts in New Jersey (they're awesome, btw).  They may also have the detent assembly, but I never needed one so I can't say they do.

You're very lucky if it didn't knock the end off of the manual valve when it broke.  That would require dropping the valve body, and a lot more parts scrounging and expense.

I took a car to an upholstery shop for some interior work.  When I went to pick it up, the shifter wouldn't find a detent to stay in gear.  The detent spring and roller broke, and it had nothing to do with the shop.  Sounds like the same thing with you. cant be blaming a shop for a 50 plus year old part breaking on them.

On a good note, I should have the detent roller.  Send me an email to  russ85747@hotmail.com 

Russ is surely the bottom line  right answer to this broken shifter issue especially having had the same experience himself 

Always glad that man is on this site for years 

Never heard of the those parts before but good to know  it’s not to bad a repair to attack 

Enjoy 

Do let Russ help you acquire your parts 

Enjoy 

From a current thread regarding a trans gasket replacement on the site  right now 

The hardest part of replacing the parts for the shift lever detent —would be to get the pan gasket back on and not leak 

Perfect time to address trans filter needs and new fresh trans fluid 

Trans all better and prepped for the long haul 

Ron enjoy getting the car back and enjoying it again 

Enjoy 

Thanks Tony,

I was reading the threads on the tranny pan gasket!! Guess that's why there was 17 pounds of RTV caked all around the pan. Gonna be Fun!!

 Ron 

very glad you are getting  very close to getting back to driving your pride and joy again 

Enjoyed learning some very good info from this thread 

Always a FUN thing for me regarding my passion for  any and all knowledge regarding our year cars 

the joy my 64 Convertible has brought to my life  for 55 years is simply priceless for this confirmed Gear head 

Enjoy 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

Door jamb switches

Started by Jay Waters in 1963/64 Cadillac Specific Discussion. Last reply by Charles Fares 7 hours ago. 4 Replies

Anyone have a good set of door jamb courtesy light switches ? 2 or 4.What does the trunk light operate from ?Continue

wanted, '64 tilt turn signal switch WITH cornering contacts.

Started by john kilbourne in Wanted to Buy. Last reply by john kilbourne 17 hours ago. 2 Replies

I have the regulra one.Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 17 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Website

Posted by Fritz Seitz on August 11, 2020 at 2:35am 0 Comments

I have been working on a website-----www.fritzsautorepair.com-----

Does anyone have suggestions?

Electrical

Posted by Anthony Boles on August 8, 2020 at 5:46pm 5 Comments

My 1964 Cadillac electrical system is running around 17 volt which is to high,the alternator, battery and the voltage regulator was replaced but the voltage is still to high, could it be the pig tail that plugs into the voltage regulator. 

63 Caddy Horn

Posted by Robert Alan Shannon on May 27, 2020 at 9:25am 10 Comments

 Just noticed a 1963  Caddy trumpet horn on Ebay. No part # given but some of his other items are 1963 specific, just throwin this out there, I have no connection to this listing .

Wiring connection help.

Posted by Jimmy Davis on May 24, 2020 at 9:15pm 2 Comments

Can someone help me figure where these connections go? I have a 64 60 special if it matters.…



Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service