Hello All,

Took the car in for front end alignment and car remains at facility. The tech drove the car into bay and returned it to the same spot that I drove into. Paid for work and was ready to drive home: when I got in the driver seat noticed the gear shifter was not in park position, but down in reverse "R". Tried to move it up to proper position to start and get out of there. Nothing doing could only get the shifter to go to drive "D", no further. Stormed back into the office and asked when were they planning on telling me the tech broke something on my car. Argruments and alot of finger pointing and I left the car for them to figure how they would like to handle the issue. The car is a 6200 series, 1963 has anyone else ever had this type of issue or know anyway that it can be resolved. I do know at some point I will have to assist them in getting the car taken care of. Any help will be gladly appreciated.

Views: 362

Reply to This

Replies to This Discussion

WHOOP!!! WHOOP!!!

Got the car back on the road with the help from everyone and especially Russ, Oh Boy!! I am having a ball driving waaayy too fast and probably way too long, can't beat this. Thanks to the entire club, love affair is rekindled.....

Happy "Caddy" Motoring,

Ron

RSS

Photos

  • Add Photos
  • View All

Forum

CLC Chapters VP Bob Crimmins & CLC SW Regions VP, Self-Starter Art Director Tim Coy Visit

Started by Jason Edge in Chapter Discussion 10 hours ago. 0 Replies

The National Cadillac LaSalle Club had their Winter Board Member this Past Saturday, Feb 27, via zoom and as an elected board member I always attend ... usually in person, but because of COVID we…Continue

brake adjuster slots

Started by Doug Scarrow in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 yesterday. 1 Reply

   Has anyone drilled the backing plates and made the slots that allow brake adjustments without removing the wheel?  I have always hated the slots in the drums.Continue

New Batch of Embroidered Iron-On 1963/64 Cadillac Chapter Patches - $4 each

Started by Jason Edge in Chapter Discussion. Last reply by Jason Edge on Tuesday. 2 Replies

As noted in our August 1963/64 Cadillac Chapter Newsletter:Around 6 years…Continue

Tags: Available, Patches, Chapter, Cadillac, 1963/64

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge on Tuesday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Need center support for convertible top

Posted by John Rueff on February 17, 2021 at 6:15pm 0 Comments

For my 1964 Cadillac Deville

Help on Removal of rear seatback on 64 convertible

Posted by Nile Bolen on January 8, 2021 at 11:44am 7 Comments

I'm trying to remove the rear seatback on my 1964 deville conv.  The only help on this site that I can find is the following:

The seatback, its bright stainless trim, and the speaker grille are removed as an assembly.  The seat back hangs on two hooks near the top, and is retained to the body by two bolts and washers near the floor, one on the right side, one on the left.Once these fasteners are removed, lift the seat back upward and free it from the hooks

I've removed…

Continue

Bumper lower bucket

Posted by Ray Schick on January 1, 2021 at 4:33pm 3 Comments

1964 Convertible Seats.

Posted by michael moorman on November 30, 2020 at 5:29pm 1 Comment

Are the front and rear seat frames the same for 63/64 Coupes and Convertibles because Original parts group  makes reproduction seat covers for 1963 only and and i prefer the 1963 seat pattern so with that being said does anyone have information regarding this thanks.

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service