Trivia Question 19 - What General Insignia is Missing on the Eldorado and Fleetwood 60 Special?

We haven't handed out any cigars lately so I have one that I "relearned" today from a visitor with a 63 Eldorado. 
So the question is there is a piece of general insignia not related to a specific body style that is missing on the 1963 and 1964 Eldorado and Fleetwood 60 Special but is found on the other body styles.

I can give some hints but will leave it a bit open to see if we have any super sleuths.

Views: 70

Reply to This

Replies to This Discussion

I never noticed this before, but just by searching pics it looks like there is no Cadillac script in the grille on those models.

Nevermind. I'm blind

Alright, going for Cadillac script again but it's missing from the glove box.

Bingo! No Cadillac Scripts on the glove box door of the 63/64 Eldo or 60 Special. I guess they decided it wasn't worth it to drill thru that nice looking steel plate with Narra/Baku wood inlay. 
                  So, MR KURT.... HAVE A CIGAR!!!!

Also, the 1963 Eldorados have neither a V nor a crest on the deck lid.

-Charles Fares

Charles that is true but they do have ELDORADO in block lettering on the trunk lid to designate the body style, as does the 1963 FLEETWOOD.  So in a way you are correct in that the general 1963 V & crest insignia is not there, but there is insignia for that particular body style. In 1964 the Fleetwoods (including Eldorado) would adopt the wreath on the hood and trunk, and block lettering would be moved to the rear bottom section of the front fenders.

Regardless, Charles also gets a Cigar!!

RSS

Photos

  • Add Photos
  • View All

Forum

63 Hydra-Matic won't shift out of first

Started by Norm Waters in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 1 hour ago. 3 Replies

Hello everyone. I had a perfectly good shifting Hydra-Matic transmission until I elected to fix the leak at the dip stick tube. I just did a quick seal with gasket maker since my current tube is…Continue

Rear brake lock up when cold

Started by Cliff Johnston in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 1 hour ago. 1 Reply

Hi everyone, ever since getting the car back on the road, the rear brakes grab when they are cold and I’m moving at slow speed.  Once I get along the road and stop they are fine. I see some posts…Continue

Vacuum advance

Started by Thomas Yarri in 1963/64 Cadillac Specific Discussion. Last reply by Thomas Yarri 14 hours ago. 4 Replies

Good afternoon to all my fellow Cadillac owners! I have a question about the vacuum advance on my car. The car is a 64 without a/c and a Rochester carburetor. I noticed that I have vacuum at the port…Continue

Blog Posts

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service