...and then the next year, in 1964, get enlarged to 429?
I would've thought that with Cadillac's going to the time, trouble and expense of re-engineering the old 331-390 engine into the next gen, they would've wanted to come right out of the box as a 429.
Doing a one-year-only new gen 390 with the same hp and torque figures as the old engine, seems like a waste of effort.
My only guess as to why it stayed at 390 cubes is that perhaps the Turbo 400 transmission wasn't ready yet in '63, and the 4-speed Hydra-matic couldn't handle the torque of the 429.
Any truth to this?
Thoughts? Information? Guesses?
Tags:
The 64 Series 62, 75 and commercial chassis used the Hydramatic, so that can't be the reason. Not sure what it is though.
Good point indeed! I'd overlooked that.
Deepens the mystery even more.
I checked out the '63 and '64 Serviceman reports, and other than details of the new 390 engine for '63, I didn't see where it explained why the displacement, hp and torque were left the same as in the old-gen 390 instead of just going straight to the 429 they they knew was coming out in '64.
As you know, engine programs call for planning years in advance of production, and so when the '63 390 was being designed, they already were aware of wanting to enlarge it to 429.
My question stands: Why did Cadillac produce a one-year-only new-generation 390? Seems like a lot of added cost and complexity, to do it that way.
IMO: When engineering a new engine, don't hide that fact (and the advertising value) by using the same displacement and output as the engine it's replacing.
For those that have read about the new for 63 390 you know there were very significant changes made from the 62 390 - 52 lbs lighter, shorter block, different crank, distributor and other components brought to front of engine, etc. Also, while the 1962 and 1963 390 blocks were very different, they used the same cylinder heads. With the 429 displacement and wider bore the heads had to be redesigned. You also have to consider that the Cadillac 390/429 is actually about the same size, maybe a tad bigger, than a small block Chevy, and they had to do some creative redesign to get that 4.13” bore. For example that reduction in head bolt size from 7/16” to the very odd 13/32” had to be to gain a bit more clearance for the thinner block walls. Also, keep in mind that by 1963/64 Cadillac was deep into development of the new V-12 that never made it to production. As I recall six V-12’s prototypes were built in 1963 and 1964.
So there was a lot going on and my guess is they decided to modernize the 390 as both a selling point and real improvement but also to buy time for continued development of the V-12. As far as the 1964 and later 429, I’m also guessing there were external factors pushing Cadillac to produce bigger torque and horsepower numbers, until they could get the 472 in production in 1968. For me the odd head bolt size has always made me think the 429 was a stopgap to keep up and ahead, but as we all know the 429 went on to be used for 4 years!
A lot of things like mounting a Buick transmission on a 1964 429 with an adapter ring, selling 1965 Series 65’s that look just like a 1964, or introducing a new for 1963 390 with the same specs as the year before May all seem odd now, but it was usually because of timing… or the lack of!
For more on that V-12 that never was, here is one article https://macsmotorcitygarage.com/a-cadillac-v12-that-never-was/
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari 8 hours ago. 4 Replies 0 Likes
Coil Springs is one part I generally do not sale (who wants a tired used coil spring), but it is also one of those items I just can't let go up. I have painted them, stuck lights in them, put them…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
North Carolina can be pleasant in the winter, with temps mild (60's/70's in the day and 40's and 50's at night); however, yesterday when I got up it was 20, and the has been in the mid 40's, Today it…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Thursday. 1 Reply 5 Likes
To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue
Tags: ebay
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 1 Reply 0 Likes
Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
December 15, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2024 Created by Jason Edge. Powered by