I would like to ask what is the best and safest way to remove windshield and rear window from 1963 Cadillac.

Which company sells the best rubbers that go around these windows.

Thank you for the help

Paul

Views: 124

Reply to This

Replies to This Discussion

Rock auto is where I got my windshield gasket from. I had them done by a restoration shop and they both leaked like sieves after. I redid my windshield because I got tired of bringing it back to be fixed and it kept leaking. Messy job but well worth doing it myself as no more leakes

what product did you use to reseal it?

I used a black polyurethane sealant made for automotive windows. I can't remember the name of it at the moment but it was 20 Canadian and I got it at an automotive window installation shop. I put the sealant in the lip of the window gasket then installed it onto the window. I then installed the window/gasket in the window frame. Then filled under the lip between the frame and gasket and finally filled the cavity with caulking. Then installed the chrome trim. I then spent an hour cleaning all excess caulk off the window and chrome. I didn't want it to cure on it. That stuff is make to stick

Sorry forgot to add you have to dig out all the old sealerfrom around the window, then cut the old rubber gasket lip, from the outside, that holds the window in and remove with suction cups. Harbour freight has them cheap. In Canada I got mine at princess auto. 

Thank you,

Paul

RSS

Photos

  • Add Photos
  • View All

Forum

Trunk won’t stay up!

Started by Don Savory in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 3 hours ago. 8 Replies

Anybody know what I need to do to make my trunk stay open. I got this car a few years back and it’s always been like this. I’m trying to everything in working order.

Engine and tranny seals

Started by Klutch in Restoration Discussion. Last reply by Tony and Ginny 429 5 hours ago. 55 Replies

Hey guys.Im going to be pulling my engine and tranny out soon. Theres some leaks on my engine and tranny. The main reason for this is because i need to paint the engine and engine bay. So i might as…Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 13 hours ago. 171 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 13 hours ago. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 0 Comments

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service