Well,  after the tire change, car running good......... then on a pleasure cruise for abour 35 miles to my destination.   25 miles in, back end vibration came back home to roost.  I was goung 55 to 65 on the trip.  Had to pyll over.  Now, im not the type to lose my temper, throw tools, or hv tantrums, but im gettin to my wits end on this.   After i pulked over, i felt the hubcake,  not overly hot.  So i decided to drive on at about 40,  as i got miving i pushed on up to 55, not one vibration.   So,  wtf coukd it possibly be from here.

I have had.....

Shoes changed

Changed cylinder.... twice! First new one was stuck!

Axle gasket replaced

Tires replaced

Had drums re cut,

Whats left?

Views: 550

Reply to This

Replies to This Discussion

Its not vibrating now,   i know i can jump up to 70+ if i need to,  and for now, thats good enough.  Gonna just ride a while. 

That kind of vibration problem becomes a ---METAL PROBLEM ISSUE --For me that has to be FIXED ------ASAP or FASTER !!!!
We need to tend to the MENTAL ILLNESS issues QUICKLy YOU SEE-- CADILLAC CRAZY ---HA-HA--HA LOL !!!
It really does say alot ( before someone else says it )

Enjoy

Kurt
Very interesting to me about the speed limit -Thanks
We have a number of different animals out on the country roads in central Fl eapecially at night
No fun hitting anything at speed

We have good size hogs ( dangeous ) medium size deer possiums armadillos turtles snakes Eaglea and very large Blue Heerings ( 6-8 foot wing span )
We have big vultures that are extremely nasty when they are in a group eating something dead
The Vultures are real big ( small eagle size ) and real ugly evil looking things
Seeing them --in a large dead three -is like a horror movie sceen you once saw
The Haulks and Eagle are always a sight to see
I have a haulk about a foot and a half that comes and visits once a year for 13 years
Think he may have been born on my homes site

Enjoy
Enjoy

Add to that black bears panters and cougars
A lot of CRITTERS as the southern boys would say

Enjoy

Kim

Can we say it rides like a Cadillac YET ???

Enjoy

id say so,,, it rides very nicely now,,, no shakes, rattle or rolls,,, keeping fingers crossed,,

RSS

Photos

  • Add Photos
  • View All

Forum

Back to Starter

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kim K Kaiser 1 hour ago. 54 Replies

Ok,  short refresher,  last dec i relpaced starter w rebuilt from usa parts.  and even then,  after short runs where i got up to temp, if i shutvcar off, and then tried to start, it would drag…Continue

'63 CDV Restomod on Iron Resurrection on Velocity Channel

Started by Ian Osborne in General Discussion. Last reply by Russ Austin 5 hours ago. 1 Reply

I just watched an episode of a show called Iron Resurrection on Velocity Channel. They did a restomod on a pretty clean survivor '63 CDV for a customer. They did an LS3 swap, air ride, complete…Continue

1963 Ignition Bezel

Started by Lee Martin in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 5 hours ago. 2 Replies

Looking for a good ignition lock nut bezel for 1963!  This is the chrome piece that holds the ignition housing in place and protects painted dash from key scratches.  Opening must be more than 15/16"…Continue

Floor Pans

Started by Tommy Nicolosi in Restoration Discussion 14 hours ago. 0 Replies

Are the floors on 1961-1964 the same???Continue

Blog Posts

HVAC Vacuum Valve Clip-need the one for the Power Control side

Posted by Norman Silverman on September 17, 2018 at 8:15pm 6 Comments

Hi.

Update:

I removed both 7 nipple vacuum valves and called my buddy who owns a machine shop. Tomorrow we'll re-surface the valve faces and then I'll reinstall them. HOWEVER, the one that comes out easily and comes apart with no rivet is on the Power module side. It installs on one side with a small bolt, and on the other it is held on by a clip, WHICH IS MISSING ON MY CAR. I am going to assume it is the same clip that is used on the Control Module side. Anybody got one? Happy…

Continue

7 vacuum valve-need a good one or someone to recondition mine

Posted by Norman Silverman on September 15, 2018 at 5:44pm 12 Comments

So, I've put my 7 vacuum valve from the control head side to the test, and it failed. I looked at the instructions for re-conditioning it and unless I am missing something, the instructions are missing something (about how to take off the clip that provides the tension that holds the two pieces together). 

In any case, I can't do this particular repair so I am looking for a new valve (not likely), or a good re-conditioned one, or someone who has done this before and would do mine for…

Continue

Mosiac Cadillac emblem Table

Posted by Dana G Cooper on August 30, 2018 at 10:48pm 11 Comments

Wanted to share a picture of a table my wife made for me to display with our 63 Coupe Deville. 

Inside door handle thread size

Posted by Michael Jarnagin on August 23, 2018 at 4:31pm 1 Comment

Anyone know the thread size on the inside door handle bolts mine are missing any info much appreciated 

Events

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service