I am looking for a new project vehicle to work on with my kids. We love our 64 Coupe and will consider another Cadillac in any condition. I also have a 2007 Yukon XL Denali, (112,000 miles, good condition) that I can include in the deal if interested (wife making me say that to make room at home but not a deal breaker if your not interested). Let me know what you have. Thanks, Jason

Views: 105

Reply to This

Replies to This Discussion

I have a 64 CDV that will need a complete restoration.  Complete car, been sitting for may years in the Arizona sun. 3500.00

Only interested in Caddys?
I have an extremely rare 1972 Ford LTD convertible that I am thinking about selling/ trading. Too many projects

This website is geared twards restoring and keeping the 63 and 64 Cadillacs rolling down the road

Enjoy

Hello, I have a 1964 Black Fleetwood 4 door. I haven't started it in over a year. Runs good,  Brake drum on one wheel locked up. Been garaged,  probably 20 years. The front passenger door has a little rust hole, I have a good spare door. The passenger side lower front bumper is pretty much non existant (rusted away). I do have a good complete bumper with lower grille and mounting brackets attached along with both turn signal assemblies. Not sure of exact mileage but under 100k for sure. Would need to be towed. Lots of spare parts to go with it, fender skirts, grilles, mouldings,  etc. I believe it has every option but the auto light dimmer. I think   $2700.00 for everything is more then fair. If not interested maybe someone else on here would be interested.

John
A location would help get this done

Enjoy

The car is located in Whiting, Indiana ,  46394.  It's about 40-50 miles south of downtown Chicago, Illinois 60617

I don't have a caddy for sale but (Tony look away) I do have a '65 El Camino project with a ton of extra parts, including an LS3 engine (as jack said, too many projects), and I might be interested in the Yukon trade. I'm in Ohio, just north of Dayton.

I have a 63 coupe deville needs restoration 

RSS

Photos

  • Add Photos
  • View All

Forum

Been busy

Started by Clovis in General Discussion. Last reply by Clovis 8 minutes ago. 4 Replies

I haven't spent much time on my old cars this summer. My latest project has been a gazebo on the new island. I'll be ready Wednesday to start putting on shingles. Tomorrow its facia and some more…Continue

Back to Starter

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kim K Kaiser 9 hours ago. 36 Replies

Ok,  short refresher,  last dec i relpaced starter w rebuilt from usa parts.  and even then,  after short runs where i got up to temp, if i shutvcar off, and then tried to start, it would drag…Continue

Here's some what a update on the engine!

Started by Haris dizdarevic in General Discussion. Last reply by Jason Edge 21 hours ago. 7 Replies

Continue

Blog Posts

HVAC Vacuum Valve Clip-need the one for the Power Control side

Posted by Norman Silverman on September 17, 2018 at 8:15pm 4 Comments

Hi.

Update:

I removed both 7 nipple vacuum valves and called my buddy who owns a machine shop. Tomorrow we'll re-surface the valve faces and then I'll reinstall them. HOWEVER, the one that comes out easily and comes apart with no rivet is on the Power module side. It installs on one side with a small bolt, and on the other it is held on by a clip, WHICH IS MISSING ON MY CAR. I am going to assume it is the same clip that is used on the Control Module side. Anybody got one? Happy…

Continue

7 vacuum valve-need a good one or someone to recondition mine

Posted by Norman Silverman on September 15, 2018 at 5:44pm 12 Comments

So, I've put my 7 vacuum valve from the control head side to the test, and it failed. I looked at the instructions for re-conditioning it and unless I am missing something, the instructions are missing something (about how to take off the clip that provides the tension that holds the two pieces together). 

In any case, I can't do this particular repair so I am looking for a new valve (not likely), or a good re-conditioned one, or someone who has done this before and would do mine for…

Continue

Mosiac Cadillac emblem Table

Posted by Dana G Cooper on August 30, 2018 at 10:48pm 11 Comments

Wanted to share a picture of a table my wife made for me to display with our 63 Coupe Deville. 

Inside door handle thread size

Posted by Michael Jarnagin on August 23, 2018 at 4:31pm 1 Comment

Anyone know the thread size on the inside door handle bolts mine are missing any info much appreciated 

Videos

  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service