Dan McNarry
  • Male
  • Calgary, Alberta
  • Canada
Share on Facebook
Share
  • Blog Posts
  • Discussions (141)
  • Events
  • Photos
  • Photo Albums
  • Videos

Dan McNarry's Friends

  • Brennan Brennan
  • Ron Westwood
  • John McNamara
  • Kim K Kaiser
  • Kevin Campbell
  • Will
  • Kurt
  • Tony and Ginny 429
  • Mark Geertsma
  • Jason Edge

Dan McNarry's Discussions

Replacement Rear Trailing Arms

Started this discussion. Last reply by Kim K Kaiser Jul 28. 5 Replies

Hello all,I haven't been on the forum for quite a while and do wish you all well. I would like to thank all of you who have purchased replacement rear trailing arms from me in the past. I realize…Continue

Oil Pan Gaskets

Started this discussion. Last reply by Kim K Kaiser May 26, 2020. 17 Replies

I don't know if any of you have attempted changing oil pan gaskets with the engine in the car but I have and it ain't easy. The biggest challenge is keeping the cork strips that seal the timing cover…Continue

Oil Pump Pressure Relief Spring

Started this discussion. Last reply by Dan McNarry May 7, 2020. 2 Replies

If anyone out there has a 63 or 64 shop manual, can you check something for me? What does the manual specify the length of the oil pump "regulator valve spring" to be? In the 62 manual the length is…Continue

Improving Cylinder Head Performance

Started this discussion. Last reply by Kevin Campbell May 2, 2020. 19 Replies

The stock Cadillac cylinder heads do a good job of getting the fuel air mixture into the engine and exhaust out at lower RPM's but are a little restrictive higher up the RPM range. Here is a little…Continue

 

Dan McNarry's Page

Latest Activity

Kim K Kaiser replied to Dan McNarry's discussion Replacement Rear Trailing Arms
"I also hv a pair"
Jul 28
Tony and Ginny 429 replied to Dan McNarry's discussion Replacement Rear Trailing Arms
"Hi Dan Very nice to hear from you  Your control arms are helping many on this site and the only real solution to  the rear  control arm replacement so keep up your great work with reproducing  them  Your…"
Jul 28
Dan McNarry replied to Dan McNarry's discussion Replacement Rear Trailing Arms
"Hi Russ, Thanks for the input. I am looking at having the machine shop take over the complete manufacturing process from start to finish. It is getting to be a bit of a chore as I have had a few health issues lately and off loading the manufacturing…"
Jul 27
Russ Austin replied to Dan McNarry's discussion Replacement Rear Trailing Arms
"I have them on my own 63. Such an improvement. The pinion angle vibration is gone.  I can feel the difference in the ride quality. It took some of the boat sway away and gave an improved ride.  I also have the inserts that go into the…"
Jul 26
Jan Johansson replied to Dan McNarry's discussion Replacement Rear Trailing Arms
"Hello Dan I hope you continue providing trailing arms. I plan to order a pair later this year Jan"
Jul 26
Dan McNarry posted a discussion

Replacement Rear Trailing Arms

Hello all,I haven't been on the forum for quite a while and do wish you all well. I would like to thank all of you who have purchased replacement rear trailing arms from me in the past. I realize that there are still customers out there for this product but I am at a bit of a cross roads. I would like to continue but over the last 4 years the cost for machining and waterjet services as well as steel have gone up and my price hasn't changed.I would like to increase my price to $420 from $385 but…See More
Jul 26
Dan McNarry and Brennan Brennan are now friends
Jul 2
Anders liked Dan McNarry's discussion Polyurethane Replacement Trailing Arm Bushings
Apr 25
Dan McNarry replied to Ian Osborne's discussion Exhaust Manifold Gaskets......Again
"I've had custom exhaust gaskets made for radial aircraft engines in both grafoil and copper. If there is an interest I could see about having sets made and was thinking copper as Ian has done but grafoil for the manifold to pipe gasket. If…"
May 31, 2020
Dan McNarry replied to Dan McNarry's discussion Caddy Daddy
"Tony, the new to me peace of mind regarding my fuel was put to the test today. We took a nice drive in the mountains and went a longer route than we normally would knowing we would easily make it back on the tank full we started out with. No…"
May 30, 2020
Dan McNarry replied to Ian Osborne's discussion Exhaust Manifold Gaskets......Again
"Nice job fabricating your gaskets. Here is a pretty good option that I use. They are grafoil gaskets from Remflex. I use them on my car with my home built headers and they work great. I would expect that they would work equally well on stock…"
May 30, 2020
Tony and Ginny 429 replied to Dan McNarry's discussion Caddy Daddy
"Dan  Glad to here your fuel gauge is now working as it should  with parts fro Russ ñand good peace of mind from that on the road  I think you must have your trans out while doing your clutch work and oil pan work If so do…"
May 30, 2020
Dan McNarry replied to Dan McNarry's discussion Caddy Daddy
"Russ, I installed the sending unit yesterday afternoon and went and filled the car up this morning. The gauge now reads accurately and I'm really happy to have it working again, makes road trips a lot less stressful. Thanks for a great product."
May 30, 2020
Kim K Kaiser replied to Dan McNarry's discussion Oil Pan Gaskets
"prudhomme was the "snake""
May 26, 2020
Tony and Ginny 429 replied to Dan McNarry's discussion Oil Pan Gaskets
"Kim “Big Daddy “ is right now that you say it  Enjoy "
May 26, 2020
Kim K Kaiser replied to Dan McNarry's discussion Oil Pan Gaskets
"i remember him,, think he went by "big daddy" didnt he,,, ??    yall were talking bout Nipples and stuff, so i was just wanting to make sure the correct definitions,, this chick was apparently pretty popular,,,"
May 26, 2020

Profile Information

Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
No, I own a 1962
Cadillac LaSalle Club Member? If Yes, Membership #?
No
1963/64 Cadillac Chapter Member?
No

Comment Wall (4 comments)

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

At 12:50pm on April 5, 2020, Will said…

Hi Dan

V4L 1M7

thanks

will

At 12:59am on April 2, 2020, John McNamara said…

Thanks Dan

Colour is not important to me.

Shipping adddress will be:

John McNamara

Strata Worldwide

1/8 Channel Road

Mayfield West NSW Australia 2304

 John

At 10:01pm on March 31, 2020, John McNamara said…

Dan

I am also interested in a set of your rear bushings.

Thanks John McNamara

Australia

At 7:13pm on January 21, 2018, Jason Edge said…

Welcome to the 63/64 Cadillac Website. 

This site is hosted by the CLC (Cadillac LaSalle Club) 1963/64 Cadillac Chapter. Joining the website is free to everyone, however, you must be a CLC member to join the chapter. 

- Click Here for more information on joining the 1963/64 Cadillac Chapter and the Cadillac LaSalle Club

Be sure and check out all the links and pages and make yourself at home.  The Help Page at www.help.6364cadillac.com will have links to many useful articles and information about our Cadillacs.

 
 
 

Photos

  • Add Photos
  • View All

Forum

Surprised no feed back on the 65 429 rear crank bearing redesign change Service

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 11 hours ago. 12 Replies

As the  rear crank bearing was redesigned in the 65  429 by Cadillac to reduce pressure on the RMS I thought it might be the answer to our endless leak issue many are having No one has found a…Continue

Love my car but hate the brakes - need some good advice

Started by Walter Anderson Bonner Jr. in General Discussion. Last reply by Mack on Thursday. 9 Replies

Need some advice: My car swerves when stopping.  The mechanic noticed the problem when he drove the car and he adjusted all of the vehicle’s drum brakes.   He, noted the brakes and drums looked good…Continue

Mark S Anderson

Started by Tony and Ginny 429 in 1963/64 Cadillac Specific Discussion on Thursday. 0 Replies

Sent you a friend request Continue

Front Dash Speaker

Started by Michael Vogler in General Discussion. Last reply by Tony and Ginny 429 on Wednesday. 15 Replies

I want to replace the front dash speaker in my ‘64 De Ville Conv.  Do I really have to take the dash pad off, to access it from the top (As I read in the shop manual)? Or does anyone have tip to…Continue

Blog Posts

Rochester throttle body gasket

Posted by Phil on September 29, 2021 at 8:18am 5 Comments

Hello,  would anybody be able to tell me if I’m using the correct gasket on my Rochester throttle body? It doesn’t  look right to me.  I’m not sure if the carb actually ran with this gasket because I got it used with no history.  Any help would be appreciated …

Continue

Rumble Sound at 55-60 mph

Posted by Ray Schick on September 20, 2021 at 10:45pm 6 Comments

64 Coupe DeVille , while driving at 55-60 mph I have a oscillating rumble sound . Steering wheel does not shake or vibrate . Transmission mount looks good .Tires were replaced 2 years ago balanced and rebalanced recently. Axel bearings were just replaced, rear differential assembly was just replaced with a Posi track ,pinion bearings good. Fresh gear lube. Driveshaft checked and balanced the other day ,new center bearing installed and new bearing carrier assembly too. Trying to figure this…

Continue

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service