steve white
  • Male
  • melbourne victoria
  • Australia
Share on Facebook
Share on Facebook MySpace

Steve white's Friends

  • Andy
  • Mike Foose
  • Jeff Burland
  • john chalk
  • Russ Austin
  • Joe DiIaconi
  • Jason Edge

steve white's Discussions

Lifter noise

Started this discussion. Last reply by steve white May 15, 2017. 7 Replies

Hi everyone here is an update on my lifter problem it turned out that there were 3 mushroomed lifters and they had chewed the cam lobes away so the camshaft has been repaired and the new lifters have…Continue

Lifter noise

Started this discussion. Last reply by Tony and Ginny 429 Apr 4, 2017. 12 Replies

Hi everyone well i finally got the stuck lifter out of our 429 engine and it was mushroomed really bad i also found another 1 on the same engine bank so i have pulled the camshaft out and the lobes…Continue

noisy lifter

Started this discussion. Last reply by Tony and Ginny 429 Mar 17, 2017. 1 Reply

Hi just an update about this noisy lifter i can remove all the other lifters on the right bank apart from the noisy 1 which is the 5th 1 from the front it gets up so far and then grabs, has any one…Continue

Noisy lifter

Started this discussion. Last reply by steve white Mar 22, 2017. 19 Replies

Hi to all i have a 64 coupe with a 429 and a lifter on the right bank is noisy i have rremoved cover and there is a lifter that is not pumping up all the way i have bought some new lifters and was…Continue

 

steve white's Page

Latest Activity

Nile Bolen replied to steve white's discussion trunk weather strip
""trap" the water, not trip...."
Aug 25
Nile Bolen replied to steve white's discussion trunk weather strip
"so the pic by Kurt completely confuses me.  that looks totally wrong to me, almost looks like the seal could trip the water in it's profile.  I guess what I'm learning is that maybe it just doesn't matter much--provided you…"
Aug 25
Jason Edge replied to steve white's discussion trunk weather strip
"I was going to comment on this yesterday but looked at my 64 CDV and mine is actually squared at the top... and not the elongated curved look from that 1st picture I had posted way back.  I wanted to look at the inside channel of one of my…"
Aug 21
Kurt replied to steve white's discussion trunk weather strip
"Hmm, I just took a look at mine and it looks different. It was installed by the paint shop in 2005 and the trunk doesn't leak. Not sure if they installed it wrong or if it is a different shaped seal. No harm, no foul. Those picky CLC judges…"
Aug 20
Nile Bolen replied to steve white's discussion trunk weather strip
"and here's the last pic called "cad4""
Aug 20
Nile Bolen replied to steve white's discussion trunk weather strip
"So I'm also trying to install the trunk seal but also finding it difficult to understand which way it's supposed to be installed.  the one I pulled out crumbled to dust so no way to look at it's cross section.  Attached are…"
Aug 20

Profile Information

Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
1964 coupe deville 1st caddy i have owned
Cadillac LaSalle Club Member? If Yes, Membership #?
no
1963/64 Cadillac Chapter Member?
yes

steve white's Photos

  • Add Photos
  • View All

Steve white's Blog

Transmission mounts

Posted on October 31, 2018 at 6:06pm 3 Comments

Hi all im trying to find out about the transmission side rubber mounts on a turbo hydramatic in a 1964 cadillac coupe deville what are they called and where could i get some i am based in australia

Wheels

Posted on December 30, 2016 at 3:17am 6 Comments

Hi can anyone tell me if there are any other cars apart from cadillac that have the same bolt pattern as a 64 cadillac coupe deville

first outing

Posted on March 16, 2015 at 3:26am 6 Comments

Hi everyone we finally took our 64 on its first outing apart from getting 5 miles per gallon and running a bit hot in traffic and having a bad vibration at 65 mph it was fun we traveled about 200 miles oh and we also blew a transmission cooler line but its all in the fun of owning a classic car! isn't it

429 starter motor

Posted on January 11, 2015 at 2:45am 7 Comments

Hi I am having problems with my starter motor where sometimes it spins but does not throw I have seen hi torque starters advertised with opg has anyone used one of these or knows any other option

Comment Wall (4 comments)

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

At 6:05pm on July 22, 2014, Russ Austin said…

Steve, I did not receive it. I may have, but missed it.

At 7:33pm on March 25, 2014, Andy said…

Hi Steve, its a '63 Coupe DeVille

At 5:52am on November 19, 2012, steve white said…

thanks jason sounds like a good website to belong to me and my partner just brought a 64 coupe that wasnt running i got it going but it has a knock so i have pulled it out and will strip it down to see what the problem is so if i get stuck with something its good to know there is a site that can help cheers steve 

At 8:48am on November 18, 2012, Jason Edge said…

Welcome to the 63/64 Cadillac Website.

Be sure and check out all the links and pages and make yourself at home.

Jason

 
 
 

Photos

  • Add Photos
  • View All

Forum

63 Lower Front Bumper Ends?

Started by Peter Greenway in Wanted to Buy. Last reply by Peter Greenway 28 minutes ago. 1 Reply

I'm looking for 2 good condition lower front bumper ends for a 1963 car. Can anyone help please?Continue

Was there Originally Carpet Inside 1964 Eldorado Center Console?

Started by C. Van Tune in 1963/64 Cadillac Specific Discussion. Last reply by C. Van Tune 10 hours ago. 2 Replies

Is there supposed to be carpet inside the '64 Eldo center console?There is carpet in mine, and it's a deeper pile than what's on the floor (which has probably been replaced.)Here's some pix of mine.…Continue

John Foust Remembered

Started by Jason Edge in General Discussion. Last reply by Tony and Ginny 429 15 hours ago. 1 Reply

I read the sad news last night on a couple of Facebook groups that John Foust, aka Honest John of Honest John's Caddy Corner has passed away.  As a fellow parts seller I had talked to him way back…Continue

vibration at 20-30 mph

Started by Ron Perry in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 18 hours ago. 6 Replies

My 64 Sedan De Ville has a vibration starting at 20 and stops at 25 to 30 mph before that and after that car runs smooth. Thinking it might be an exhaust vibration I put a little sill glide silicone…Continue

Blog Posts

Trunk Open and Lock Mechanism is in Closed Position

Posted by Chris Anderson on September 13, 2022 at 7:14pm 7 Comments

While working on my trunk lock on 64 Cadillac, I mistakenly closed the locking mechanism while the trunk was open.  Is there an easy way to manually release the lock back to the open position?

Thanks.

Fuel Pump Failure

Posted by Jon Shields on August 6, 2022 at 6:48am 3 Comments

Hello,

I'm located in Melbourne, Australia and my 64 sedan de ville is stuck in the garage due to failed mechanical fuel pump. The first after market mechanical fuel pump lasted a few years before it failed & left me stranded 5 hours from home. A hire car and tow got us home. On inspection, I noticed a valve not seated within the housing. I was optimistic, pressed it into place and assumed the pump was good to go. But alas, no. From what I can now determine, the diaphragm pushrod…

Continue

Renovation project 1964 Cadillac Deville convertible

Posted by Balachne on May 31, 2022 at 7:00am 3 Comments

Renovation project 1964 Cadillac Deville convertible

 

Introduction

To achieve an excellent result of vehicle restoration, it is essential to  manage this task as one manages an industrial project.

To do this we will use a certain formalism of project management and therefore start by defining the need. It is from this that we will deduce the scope, then the time of execution of the…

Continue

I was working on my HVAC system this winter and during the process of taking the dash pad off these two parts fell out. Does anyone know what they are and where they go?

Posted by Patrick Westphal on April 12, 2022 at 1:35pm 1 Comment

I was working on my HVAC system this winter and during the process of taking the dash pad off these two parts fell out. Does anyone know what they are and where they go?

Videos

  • Add Videos
  • View All

© 2022   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service