I was walking down the hardware isle and “Boom” had a idea for these .....

Views: 68


You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Comment by Jason Edge on October 22, 2018 at 8:42am

Wanted to add that I picked up a few of these last week at Home Depot. There are tons of uses for nice insulated clamps like this. I recently reinforced our living room foundation floor and rewired everything(cable, power, Cat 7 ethernet, speaker) and these would be great where I had bundled wiring.  In my garage I used a couple of these for the heavy gauge power wires to the power strips at the front of my work benches. They are easier to install and look better than the insulated staples and cheaper clamps I usually use.  Interesting how my car stuff often ends up on my house stuff and vice-versa.

Comment by Clovis on October 4, 2018 at 8:23am

Nice and neat addition to an already neat and clean engine bay.

Comment by Jason Edge on October 3, 2018 at 5:54am

Very nice solution … and if you want to stay a bit closer to original look those clamps I see over on the left would be a good option also. I got my reproduction  from USA Parts, and know Russ sells nice repros so we do have options!

Comment by Jeff Kinzler on October 3, 2018 at 1:07am
Your solution looks very neat!
Comment by Jeff Kinzler on October 3, 2018 at 1:06am
I was able to find a plastic "rivet" and nylon strap in Lowes hardware dept. and approximate the original.

Could the reason for non metallic fasteners be to reduce the liklihood of a short in the event of a front collision?
Comment by Christopher Codd on October 2, 2018 at 3:22pm

Nice! I'm all for ditching all the plastic on these cars. I still have what's left of the broken plastic clamp on my radiator housing and that looks to be a great replacement option. 


  • Add Photos
  • View All


Clutch fan?

Started by Jeff in 1963/64 Cadillac Specific Discussion. Last reply by Jeff 16 minutes ago. 8 Replies

having a tough time finding a clutch fan that fits.  Got the one from napa that they had listed for a 64 but the hub is to big (2.600), the hub on my original one is 2.400.  I ordered one from rock…Continue

Hey Jason,

Started by Kevin Campbell in General Discussion. Last reply by Jason Edge 7 hours ago. 3 Replies

Have you done Dino's lifters yet?Continue

1964 cadillac for $500 needs to go latest tomorrow.

Started by paul k in For Sale. Last reply by Tony and Ginny 429 9 hours ago. 11 Replies

I m posting this for Trevor .He wants junk this car and I feel sorry for it.I can't buy another "project" car -my wife would be upset.So I decided to post this for him.His phone :631-827-3457 .Car is…Continue

Blog Posts

Original 64 Color sanded and buffed out

Posted by Norman Silverman on November 10, 2018 at 9:05pm 14 Comments

I finally got the car back from the body shop, where they color sanded and polished it out. I am literally blown away by the result! Now, it looks great from 2 feet but if you look REALLY CLOSE you can see that the paint is not as glossy as it should be, but Sothe end result is much better than what I started with. The interior is still original.




Transmission mounts

Posted by steve white on October 31, 2018 at 6:06pm 3 Comments

Hi all im trying to find out about the transmission side rubber mounts on a turbo hydramatic in a 1964 cadillac coupe deville what are they called and where could i get some i am based in australia

Dustless blaster

Posted by Kurt on October 30, 2018 at 12:23am 1 Comment

Here's something cool I stumbled across on Youtube. Pretty cool. It's like a power washer with sand.


Source for Replacement Radiator for my 64 with AC

Posted by Norman Silverman on October 29, 2018 at 2:33pm 5 Comments

I want to replace the radiator in my 64 DeVille. 

Which vendor is a good source for an OEM type unit?




  • Add Videos
  • View All

© 2018   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service