Jason Coupe DeVille Resto - Rebuilt Original Power Brake Booster and Master Cylinder Installed

I've had a newer aftermarket power brake booster and master cylinder in my 64 Coupe DeVille the past few years and it has very few miles (and on the way to good home now), and has been a great brake setup, but as I continue to restore my car to an "Original Look" this was one of the areas I wanted to return to original in appearance.   It is also one of the areas I would get dinged a point or two when I take the car to the Grand National for Judging, and I  just like the original setup better anyway! I've had an original rebuilt Delco Morraine waiting to go in my 64 for well over a year and finally got around to installing it this week.

According to the shop manual the Delco Morraine is zinc plated. It doesn't list it as yellow zinc or silver zinc.  My booster and master cylinder came silver-grey which is the natural color of zinc anyway so I think I'm in the ballpark!  Also looking at Fig 6-10 in the shop manual the cap looks a little lighter and the hold down clamp is black.  The cover was scruffed up a bit anyway and painted it with the Tank Tone paint I bought from Eastwood sometime back, and painted the hold down clamp black. I put a washer beneath it to protect the paint until it cures more.

I have a car show this weekend and was a bit nervous about removing and replacing the brakes booster and master cylinder, but all is installed, brake system has been bled and all is working perfectly!  I used a vacuum pump to bleed the brakes which was a first for me, and now I'm asking myself why I didn't use this method 30 years ago!

 Below are pictures of the aftermarket setup I have had in the car, the rebuilt original Delco Morraine setup I've had waiting in the wings for over a year to installed, and everything installed in the car and ready for this weekend's meet-up and car show with the NC Eastern CLC Members in Clayton, NC.

 

 

 

 

Views: 3395

Comment

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith yesterday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Events

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service