Norm Waters
  • Male
  • Lenexa, KS
  • United States
Share on Facebook
Share
  • Blog Posts
  • Discussions (8)
  • Events
  • Photos
  • Photo Albums
  • Videos

Norm Waters's Discussions

63 Hydra-Matic won't shift out of first

Started this discussion. Last reply by Tony and Ginny 429 Aug 8. 17 Replies

Hello everyone. I had a perfectly good shifting Hydra-Matic transmission until I elected to fix the leak at the dip stick tube. I just did a quick seal with gasket maker since my current tube is…Continue

 

Norm Waters's Page

Latest Activity

Tony and Ginny 429 replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Norm Very happy  you are back in action with some time and help from your Cadillac friends and minimum expense  Enjoy having her back !  Enjoy "
Aug 8
Norm Waters replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"It was the governor. Both valves were stuck, a good cleaning and refill and all is good. I was amazed at the torque someone had but on the rear extension bolts. I had to use a half inch impact wrench to break them loose! Same at the universal flange…"
Aug 8
Norm Waters replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Thank you again for all your help and knowledge. If the gasket gets here tomorrow I’ll give it a shot!"
Aug 5
Mark S Anderson replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"The valve body is somewhat protected by the filter, and is usually 'self-cleaning'.   I actually doubt that silicone would survive long in there.  I'd focus first on the governor weights, then drop the pan and clean it…"
Aug 5
Norm Waters replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Mark, Russ and Tony Thank you for your reply’s and the willingness to help a new Series 62 owner. I.m learning this sight is invaluable to the owners of theses cars. I know my way around a wrench but am a bit nervous about tearing into an…"
Aug 5
Tony and Ginny 429 replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Mark  Thank you much for your explanation and  your understanding of the Hydramatic trans  love when a subject gets the attention it does on this super site for our year Super Classic Antique  Cadillac owners  Enjoy "
Aug 5
Mark S Anderson replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Unfortunately, by the 63 model year, the Hydramatic's days were numbered, and the theory of operation info in the shop manual is quite sparse.  There are just perfunctory images and no hydraulic flow diagrams at all.  I guess by 63…"
Aug 4
Tony and Ginny 429 replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"I think it should read —G1 passage valve is stuck closed  I think we just corrected the Service Manual on the subject Enjoy "
Aug 4
Norm Waters replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Tony Thanks for the reply, so there isn’t a G1 valve as stated in item (a) “G1 valve stuck closed”? Thanks for your continued help, I just want to tear it apart once. "
Aug 4
Tony and Ginny 429 replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"G1 is a passage that could be obstructed  — as of item d on the  bottom of the chart you posted - so not a valve  Enjoy "
Aug 4
Norm Waters replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"I thought that as well except that valve is called G2 on the exploded view in the manual. I can't find any mention in any exploded views of a G1 valve. There is a G1 passage in Fig 6-6 transmission case oil passages. Thanks"
Aug 4
Mark S Anderson replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"G1 valve they refer to is in the governor assembly, i believe.  It is the valve that opens and closes when the weights move."
Aug 4
Norm Waters replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Russ I believe you are right. I went back out and ran the diagnostic tables and came up with a condition 2-9602 which is an 11 on diagnosis index chart. See attached chart which would lead me to believe it is the governor. I'm waiting on the…"
Aug 4
Russ Austin replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Only think I can figure is that debris fell into the trans and settled into the governor.  "
Aug 4
Tony and Ginny 429 replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"The TV Rod on the carb of a 63 controls the  trans shift points  Just be sure all looks as it should on the carbs linkage in that location ( nothing loose or falling off )  Just some basics that come to mind  Enjoy"
Aug 3
Norm Waters replied to Norm Waters's discussion 63 Hydra-Matic won't shift out of first
"Yes got the everything up to temp and checked level it was a about half a pint low. I left it running and added to the full mark. Still nothing above 1st gear. "
Aug 2

Profile Information

Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
1963 convertible
Cadillac LaSalle Club Member? If Yes, Membership #?
No
1963/64 Cadillac Chapter Member?
No

Comment Wall (1 comment)

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

At 10:39am on June 27, 2021, Jason Edge said…

Welcome to the 63/64 Cadillac Website.

This site is hosted by the CLC (Cadillac LaSalle Club) 1963/64 Cadillac Chapter. Joining the website is free to everyone, however, you must be a CLC member to join the Chapter. 

- Click on www.join.6364cadillac.com for more information on joining the 1963/64 Cadillac Chapter and the Cadillac LaSalle Club.

Be sure and check out all the links and pages and make yourself at home. The Help Page at www.help.6364cadillac.com will have links to many useful articles and information about our Cadillacs.

 
 
 

Photos

  • Add Photos
  • View All

Forum

Rear main seal. 63

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 10 hours ago. 3 Replies

My rms is leaking again.  I hv cked all other options for leaks and its none of those.  Ie, oil presdure, valve covers, etc.  So i called egge to order another one.  I asked the guy wat contack…Continue

Selling 1964 Coupe Deville Parts

Started by Gary Smiley in For Sale. Last reply by Gary Smiley 12 hours ago. 2 Replies

What I  have are many extra original, hard-to-find 1964 Cadillac Coupe Deville Parts (from donor car).…Continue

Tags: doors, hood, engine

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 18 hours ago. 275 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

Rumble Sound at 55-60 mph

Posted by Ray Schick on September 20, 2021 at 10:45pm 6 Comments

64 Coupe DeVille , while driving at 55-60 mph I have a oscillating rumble sound . Steering wheel does not shake or vibrate . Transmission mount looks good .Tires were replaced 2 years ago balanced and rebalanced recently. Axel bearings were just replaced, rear differential assembly was just replaced with a Posi track ,pinion bearings good. Fresh gear lube. Driveshaft checked and balanced the other day ,new center bearing installed and new bearing carrier assembly too. Trying to figure this…

Continue

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service