Hello,It is me again....sorry.I'm ready to install hood to cowl seals and I do have a problem -what is the correct position?I try few different position and they look ok to me.Can someone take a…Continue
"Paul, Your orientation is correct, just as Russ pointed out: "The nut plate bar goes on the center impact bar side and the bolts go in through the end impact bar side." The shim is sandwiched between the 2 pieces. Shim goes on with…"
"Thais the nut plate bar and shim for the upper end impact bar to upper center impact bar. The nut plate bar goes on the center impact bar side and the bolts go in through the end impact bar side. It keeps the 2 pieces together.
Really nice job realizing the nob location issue was the problem
Where else could you ever get this kind of spot on repair info for such a specific unique repair
This place and the individuals ( you…"
"If you are pulling on the nob and the antenna is already down it is working correctly. ( on that side ) and will make a clicking sound when bottomed out
you need to get the motor to rise —when you push in the nob
Hello - just signed up for this forum - looks like a great resource! I perused the posts and did some searches. I see most of the posts related to my questions are about doing away with resistance…Continue
I will be replacing the starter solenoid tomorrow (actually my mechanic will do the work, I'll just supervise). In checking the FSM electrical schematic and chapter verbiage, I don't see anything that looks like (or is referred to as) a starter Relay. It seems the Starter Solenoid serves the function and there's no separate relay. Right or Wrong?
I believe the starter solenoid has gone bad in my 64 DeVille. When I turn the key, often all I get is a click, then if I try a few times again the starter turns perfectly. All battery cables are on tight and the battery is good. So, I believe this problem is the solenoid. Where do I buy the right solenoid and is it necessary to remove the starter in order to swap it out? …