I see other members have put LS engines into their cars. I am wondering what springs you put in afterwards. I cannot determine the height due to the car having a front end fire (how I ended up with it) so the driver spring is weak and sagging.
Tags:
If you've already dropped the engine in the car, why not just jack up the sagging side to the same height as the non-sagging passenger side and see if you like the height. Jamco sells lowering coils if it sits too high.
Going with 2" drop springs in the front. Should yield me 1" lower than stock ride height hopefully. Match the rears after the fronts are installed.
Started by Russ Austin in For Sale 8 hours ago. 0 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 10 hours ago. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Michael Vogler in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 16 hours ago. 7 Replies 0 Likes
My original '64 Devile radio has been rebuild and upgraded. Can't wait to get in back in the car!https://youtu.be/DgYqoV290KwContinue
Started by Doug Scarrow in For Sale 23 hours ago. 0 Replies 0 Likes
Just listed nice 1964 Cadillac steering wheel for tilt column https://www.ebay.com/itm/266781070358. $150 plus $25 USA shippingContinue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by