Latest Activity

Dennis P. DiBari replied to Scott Santora's discussion Radiator Re-core PLEASE HELP
"Scott,      It doesn't look like he did from the pictures you posted. Dennis DiBari"
30 minutes ago
Scott Santora replied to Scott Santora's discussion Radiator Re-core PLEASE HELP
"Russ,  According to the vendor, he ordered the new core by size, then it gets shipped to his shop, unpainted. He takes the original tanks off the old core and then assembles the old tanks onto the new core and he then paints the whole radiator.…"
49 minutes ago
Russ Austin replied to Scott Santora's discussion Radiator Re-core PLEASE HELP
"It looks like the manufacturer skimped on the coating for the fins. "
1 hour ago
Dennis P. DiBari replied to Scott Santora's discussion Radiator Re-core PLEASE HELP
"Hi Scott,      I took a good look at your radiator pictures for your 63 Caddy that you posted.  Over the years, we sent myriad radiators out to be serviced at my dad's shop in Brooklyn, for all type of GM cars (1960s and…"
1 hour ago
Scott Santora posted a discussion

Radiator Re-core PLEASE HELP

I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green oxidation throughout the core of the radiator. I told the vendor that there was no way that this was a new radiator core, that brass just can't and doesn't oxidize that much in only a few weeks. He told me with a straight face that the core was "absolutely brand new" and that the process used to…See More
1 hour ago
Cees de Bunje replied to Jason Edge's discussion Trivia #29 - What Movie Is this?
"wow wow wow. you know your stuff Jason. If I could I would give you a cigar personally. Chapeau."
9 hours ago
Jason Edge posted an event
Thumbnail

April 21, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up at Zoom

April 21, 2024 from 8pm to 9:30pm
Our next Virtual 1963/64 Cadillac Chapter Meet-Up will begin Sunday, April 21, 2024 at 8pm Eastern (7pm Central, 6pm Mountain, 5pm Pacific).  Email invites will be sent to Chapter Members.  If not a member of the Cadillac & LaSalle Club and our 1963/64  Chapter, check out the many benefits at www.benefits.cadillaclasalleclub.org then join at…See More
23 hours ago
Todd Fox replied to Todd Fox's discussion 1964 Floor braces rot
"Thanks Russ. I'll reach out through email."
yesterday
Jason Edge posted a discussion

Nice 1963 to 1967 Cylinder Head Water Outlet Pipe Assembly - $150

I just pulled a very good Cadillac Cylinder Head Water Outlet Pipe for cars with AC with the extended arm for compressor. That came off a running parts and is a nice piece. Included is a new 180 degree thermostat, and gasket; the top thermostat housing cover, and the heater hose nipple. I also used gold cadmium plated original “TR” stamped bolts for the thermostat top cover.FITS: All 1963 to 1967 Cadillacs with AC, except 1967 EldoradoPRICE: $150EMAIL ME at jasonedge64@outlook.comNOTE: I can…See More
yesterday
Dennis P. DiBari liked Michael Vogler's profile
yesterday
Russ Austin replied to Todd Fox's discussion 1964 Floor braces rot
"No suppliers of new braces, but if you take pics of what you need, I can cut them from my parts car. "
Tuesday
Todd Fox left a comment for Jason Edge
"Thanks Jason. My 64 is my first Cadillac out of maaany cars. I'm pretty sure I overpaid but it's mine now. I just want it to be a nice dependable driver. The engine and trans have been rebuilt and it has been repainted at least once. Still…"
Tuesday
Larry Rees posted a discussion

40A CB in fuse box

Don’t know if this is common knowledge or easy to find but was able to order a 40A Circuit breaker to fit in the fuse box from Crimp Supply inc or on Amazon from the same company source. Just thought I would pass it on. See More
Tuesday
Todd Fox posted a discussion

1964 Floor braces rot

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. See More
Tuesday
Todd Fox updated their profile
Tuesday
Jason Edge left a comment for Todd Fox
"Hi Todd, Welcome to the 1963/64 Cadillac Chapter & Website. Be sure to jump in and tell us a bit about your 1964 Convertible. Jason. "
Tuesday
Todd Fox is now a member of 63/64 Cadillac Website
Tuesday
Jason Edge replied to Jason Edge's discussion Trivia #29 - What Movie Is this?
"OK. So here is the discrepancy.   The outside of the car shows a 1964 Coupe de Ville. When the character Sy Ableman is driving the car and showing the interior, it is a 1964 Fleetwood 60 Special!   When I was watched for the…"
Monday
Jason Edge replied to Jason Edge's discussion Trivia #29 - What Movie Is this?
"Yep, Gorgeous color. "
Sunday
Jason Edge replied to Jason Edge's discussion Trivia #29 - What Movie Is this?
"I have the luxury of the fact that I rip all of my movies to PC and can scan and stop.  If anyone has a copy go to about the 52 minute mark and tell me what you are seeing in the interior... might not be quite right. I will share a screen print…"
Sunday
 
 
 

Photos

  • Add Photos
  • View All

Forum

Radiator Re-core PLEASE HELP

Started by Scott Santora in General Discussion. Last reply by Dennis P. DiBari 30 minutes ago. 4 Replies

I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green…Continue

Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Cees de Bunje 9 hours ago. 13 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

1964 Floor braces rot

Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox yesterday. 2 Replies

Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue

Tags: support, brace, Floor

Nice 1963 to 1967 Cylinder Head Water Outlet Pipe Assembly - $150

Started by Jason Edge in For Sale yesterday. 0 Replies

I just pulled a very good Cadillac Cylinder Head Water Outlet Pipe for cars with AC with the extended arm for compressor. That came off a running parts and is a nice piece. Included is a new 180…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service