doing some prelim distributor application. A guy coming in tomoro to help me put in engine, so doing some pre planing, fitting, in the attached picture, is the rotor pointing at number 1 or shoukd i re install back a notch or so so that it falls more to the right. My hb is lined up on 0, and looks like 1 cylinder is at tdc. So for when i get ready to insrall, shoukd the pointer be a little more clockwise, like ppointingover the first spring more?
Tags:
I'd bump it back a notch.
Im running petronics so dntvuse points
Got it in! By the. Hardest.
Some items i found along the way.
The trans kickdown got bent , i guess during extraction. Points more up than parrelel to body. Dnt kno how it happened. But, guessing i can bend dk downward and into a parrelel poistion to hook up to carb?
Second the pcv line runs up the valley pan, then curls bk toward front of carb. I hv a picture of it, but it doesnt show if it attaches at front, i cant seem to find an attachment point or does iy just sit under there open ended?
Got exhuat hooked bk up, radiator hoses tonight, intake, carb tomorow.
Yes, thats it, when i was testvfitting, i didnt put on the spacer, and it does hv that connection, thanks.
Scott Santora Online
Started by Doug Scarrow in For Sale 12 hours ago. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 22 hours ago. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Started by Russ Austin in For Sale. Last reply by Russ Austin yesterday. 2 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by