I live in CA. I’m a relative newbie to working on my own car.  My ‘64 DV Conv fuel tank had a corrosion hole.  I leave near OPG and picked up a replacement tank today and installed it. Simple enough job.  Car is running great’ no leaks, sending unit is working as it should, and there seems to be no issue.  However, the tank I picked up was a no vent tank with a vented fuel cap.  When I filled up the tank at the gas station I could not get a full tank, as the pump nozzel shut off kept kicking off and I had some spillage.  And there was some gurgling.  With the fuel neck lower than the top of the tank, the need for a vent became apparent.  Is there anything I can do short of putting in another new tank?  Fill using a long funnel, which probably won’t help...or????

By the way, the replacement tank does not have a drain, which I thought odd...

Thanks for your thoughts and feedback.

Mike

Views: 582

Reply to This

Replies to This Discussion

I guess I am confused since the 26 gallon replacement tank I see advertised on the OPGI Website (Click Here) not only has the drain plug and vent tube, but some sort of extra port on the corner. The orientation of the vent tube, sending unit opening doesn't make sense. Click Here to see the tank I come up with on their site when I search on say 1964 de Ville Cadillac. 

As far as spillage up at the top of the filler tube, I would say just go easy as it fills and there's nothing that requires gas to fill all the way up into the filler tube. Since the gas pump nozzle is small compared to the old "regular gas nozzles" and the tube is wide (1.5" or more), i think it should fill up OK unless you were sitting on a hill with the front of the tank pointed upward forming a sealed air pocket as the tank gets near the top. Regardless, I am curious which tank you bought. I also remember they sold a smaller (maybe 20 gallon) tank but don't even see it on the site any more. 

Here is the tank I see when I search on my 64 CDV at OPGI. With the weird orientation of everything I am asuming the one you bought looks nothing like this 26 gallon tank:

That gas tank has the orientation for the Commercial Chassis, with the exception of the sending unit hole. 

Gentlemen, thank you for your replies. The tank is an exact fit, and looks identical to the original tank, except for the lack of a vent and drain. Now there are flat spots on the tank locations where the vent and drain should be. (Perhaps they expect that I’m skilled enough to put those in, which I’m not). The SKU CE10460 on the replacement tank box matches my invoice and the OPG catalogue as a 26 gal tank for the ‘64. However the picture on the website is different than the replacement tank. If you all don’t think there will be a problem, I will likely leave it as is because there is almost no gas smell in my garage, which makes the wife happy as the old leaking tank sent fumes into her closet (we have a laundry chute into the laundry area). If you all think there may be a problem, please advise.

Thank you again for your replies.

Mike

I see zero issues. You have a nice new shiny tank and just need to watch topping it off. We all have to pick our battles.  Your  only battle is topping it off at the gas pump. Many complain about spillage out of the vent pipe ...you have eliminated that potential issue.

Thanks, Jason. I appreciate your advice.

Fuel tank works great. Fuel sending unit works great.  Gas gauge works great.  No gas smell coming up the laundry chute  from the garage into to my wife''s closet.  He is VERY HAPPY!

Mike

That is fantastic and good to know the tank works as a replacement!

When I followed Jason's link, there is a button that you click to check vehicle fitment. That pulls up a set of descriptors, for the vehicles the tank works with. In the description, it states that there is no vent, drain, or neck.

I'm glad the tank is functioning satisfactorily! Corrosion (or any other) holes in a fuel tank are no joke! Replacing that tank as you did was the best thing you could have done. :)

That is consistent with what Michael indicated in the original post regarding no vent pipe, (has vented cap), and no drain. I am not sure what no neck means, other than not provided with the tank (i.e. you use the filler neck and hard masticated rubber hose that came with the car).

RSS

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith yesterday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service