I've reworked my tail/brake/backup lights on my 1963 Series 62 convertible, but the wire connectors from the trunk to behind the license plate are just not dependable. I've tried cleaning the leads, bending the leads, and a host of other cleaning and mechanical adjustments, but they just won't stay snug and electrically connected.
I'm looking for an replacement connector set. It looks like connectors similar to the original are not available anywhere. I suspect the best solution is either to hardwire or do a three prong connector set with the connectors in the trunk and the wires run through a rubber gasket to behind the license plate. Any thoughts on the best approach and what type of connector to use?
It's these connectors (pushed into trunk in photo):
Here's a picture with them in place behind the license plate:
Tags:
If you don't mind splicing in ... on the trunk harness side I have VG trunk harness rubber push in grommet/connector with a good length of pigtail wire for each for $20. I also have the complete trunk wiring harness for $45 in VG used condition, but you can splice and it would never be see as the wire runs under the trunk floor mat.
On the tail lamp/courtesy lamp side with the female connectors that push in to the rubber grommet/connector as seen in your 2nd picture, I have connectors with a good length of pigtail for $20 for the set of 2. If you buy inners and outers I would plug together and make sure they have continuity.
I can ship any of this for $8 with 2 to 3 day priority to U.S. destinations. If interested in going the VG used route, shoot me an email to jasonedge@nc.rr.com and let me know what you are interested in.
Just replace the terminals in the male connector. Those are the ones that expand and get loose. I use a tiny jewelers screw driver.
I'm getting an error trying to add a file. Go to my facebook group to see how to remove the terminals.
Congrats, on the fix. Always better to repair what you have!
Just glad I can help out.
Scott Santora Online
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 21 Replies 1 Like
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Doug Scarrow in For Sale yesterday. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Started by Russ Austin in For Sale. Last reply by Russ Austin on Wednesday. 2 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by