I got rms seal chged and all bk together. Tried to start, nothing. No lights nothing, so i got to lookong around figuring that therecwasnt but one connection elextrical. I tested battery for drainage, it was ok. I then shook a few wies to see. If i pulled something land the big one going to starter from battery i didnt hook up. It got hung up when i took it off and didnt see it when i put starter back in. Well, when shook it i hit someting and sparked pretty good. So i unhooked again, rehooked up the wire to started and hit switch. The generator light now comes on, but engine does budge. Just the gen light, and it sort of looks weak. So i cked fuses, none look blown. I took the big 40 amp power fuse out and turned key, gen light still comes on but just like with it in, the engine is silent.
So what would be next in line to check, the voltage regulator and how would you check that. Solenoid? I just dnt know enough about power to know were to look next. Thanks
Tags:
Problem solved, nothing damaged, one of my forrest forrest gump moments! Pulled connection loose, re attached everything, covered up parts Jason reffered that needed heavy black taping. See RMS thread for current result of rms. Repair
Scott Santora Online
Started by Jason Edge in General Discussion 7 hours ago. 0 Replies 0 Likes
I have been quiet lately, and just wanted to jump in an chat a minute. I have back to back visits to potential CLC Winter Board and Grand National Sites, not to mention I have been pushing to get…Continue
Started by Jason Edge in General Discussion 7 hours ago. 0 Replies 0 Likes
Very busy day working the parts cars yesterday, pulling engine and transmission out parts car #59, getting parts car #60 off the car hauler, then parts car back up on car hauler for final…Continue
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Tuesday. 1 Reply 0 Likes
My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue
Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies 0 Likes
Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by