Rick Yasenchack's Discussions (12)

View

Discussions Replied To (10)	Replies	Latest Activity
"okay, thank you Russ. Learning is painful. So for base knowledge, what I did with…" Rick Yasenchack replied Jun 22 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari
"I did not the first time. The second time I bled the master at the line connections…" Rick Yasenchack replied Jun 17 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari
"Thanks guys. I was not looking to have one rebuilt, it came with after market boost…" Rick Yasenchack replied Jun 16 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari
"cadillacpartsltd has just a rebuild kit. Thanks again for suggestion. " Rick Yasenchack replied Jun 8 to Aftermarket Brake Booster	3	Jun 8 Reply by Rick Yasenchack
"I will look now. So far new set with master cylinder is all I find from Summit. Som…" Rick Yasenchack replied Jun 8 to Aftermarket Brake Booster	3	Jun 8 Reply by Rick Yasenchack
"was too small, mechanic put 1/2" line and it improved. Sorry for long delay " Rick Yasenchack replied Jun 8 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari
"Okay all, I've missed the web site all the postings as been busy with renovations go…" Rick Yasenchack replied Jun 4 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari
"I’m puzzled by your reply 🤔. You stated aftermarket will be rock hard and same time…" Rick Yasenchack replied Aug 16, 2025 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari
"I will check on that Monday, the hose is new I know. Will check size and type " Rick Yasenchack replied Aug 16, 2025 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari
"He is only pulling about 12-15 off the carb, was going to play with timing which nee…" Rick Yasenchack replied Aug 16, 2025 to Brake Booster not enough compression	20	Jun 22 Reply by Dennis P. DiBari

RSS

Welcome to
63/64 Cadillac Website

Sign Up
or Sign In

Or sign in with:

Photos

Forum

Ignition Resistor Wire Purpose, Ignition Switch Circuit

Started by Jason Edge in 1963/64 Cadillac Specific Discussion 8 hours ago. 0 Replies 0 Likes

Sunday we had a very detailed discussion in our Zoom meet-up on the resistor wire and the cranking and ignition system, I consulted ChatGPT and gave it the 1963 Shop manual and asked (prompted) with…Continue

63 Coupe de Ville Interior Wiring Diagram

Started by Robert Schles in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 8 hours ago. 3 Replies 0 Likes

The interior wiring is spread out among a few different schematics. I combined them into one drawing. I hope it can help someone troubleshoot the intermittent interior lighting and those pesky door…Continue

An AI Enhanced Logo Upgrade.

Started by Jason Edge in Chapter Discussion. Last reply by Dennis P. DiBari on Thursday. 6 Replies 0 Likes

I have been having some fun with ChatGPT recently and decided to have a quick go at our old "back of shirt" logo. In about 5 minutes I came up with what you see below. I thought it was impressive.…Continue

Take heads off for rebuild

Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin Sep 7. 11 Replies 0 Likes

Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue

Blog Posts

Authenticity Manual

Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments 0 Likes

Hi Robert,

I emailed you more pictures for the Authenticity Manual.

Dennis DiBari

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu