Trivia (26)

Discussions Replies Latest Activity

Trivia Question 20 - Find the Cadillacs!

For those that made it to the last page of our last news letter OR for those Chapter member that hung around to the end of our last Virtual…

Started by Jason Edge

11 Feb 15
Reply by Tony and Ginny 429

Is it a De Ville or...

Martigues

Started by Anders

3 Aug 29, 2020
Reply by Tony and Ginny 429

Trivia Question 19 - What General Insignia is Missing on the Eldorado and Fleetwood 60 Special?

We haven't handed out any cigars lately so I have one that I "relearned" today from a visitor with a 63 Eldorado.  So the question is there…

Started by Jason Edge

6 Jul 24, 2020
Reply by Jason Edge

Trivia Question 18 - What Is It?

Here is a part pulled from the latest parts car. What is it? HINT: Always me me smile when I find these.

Started by Jason Edge

3 Mar 29, 2020
Reply by Jason Edge

Trivia Question 17 - Item You COULD NOT Delete Because of Cars Heater

OK. We had so much fun with the last Trivia regarding the car's heater, I thought we should post another heater related question.  So here…

Started by Jason Edge

12 Dec 13, 2019
Reply by Jason Edge

Trivia Question 16 - Standard Item You could Delete for Reduced Cost?

OK. Here's a new trivia. There is at least one main standard (non-option) item that one could "delete" on a new 1963 or 1964 Cadillac for a…

Started by Jason Edge

22 Dec 13, 2019
Reply by Jason Edge

Trivia Question 16 - Dealer Option One Year - Factory Option the Next!

OK..Here is a trivia question I have meant to ask over the years but never got back to it. The question is: What option was a Dealer Instal…

Started by Jason Edge

24 Sep 24, 2019
Reply by Tony and Ginny 429

Trivia Question 15 - WHAT IS IT?!?!

OK, it has been way too long since we had some Trivia Fun.  So here goes...Check out the picture below and tell me what is it?For Extra cre…

Started by Jason Edge

10 Aug 10, 2019
Reply by Jason Edge

Trivia Question 2 - 1963 Cadillacs with Bucket Seats

OK...let's see who get's the Cigar today!! Trivia Question #2: What Percentage of 1963 Model Year Cadillacs came with bucket seats?

Started by Jason Edge

32 Apr 29, 2019
Reply by Jason Edge

Trivia Question 14 - Cadillac Water Level Plug

Ok. So someone asked for trivia. This one should be pretty easy. As noted before, my 50+ year old Cadillac and 100+ year old house projects…

Started by Jason Edge

15 Dec 23, 2018
Reply by Ian Osborne

RSS

Photos

  • Add Photos
  • View All

Forum

63 Hydra-Matic won't shift out of first

Started by Norm Waters in 1963/64 Cadillac Specific Discussion. Last reply by Norm Waters 2 hours ago. 7 Replies

Hello everyone. I had a perfectly good shifting Hydra-Matic transmission until I elected to fix the leak at the dip stick tube. I just did a quick seal with gasket maker since my current tube is…Continue

Rear brake lock up when cold

Started by Cliff Johnston in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 18 hours ago. 1 Reply

Hi everyone, ever since getting the car back on the road, the rear brakes grab when they are cold and I’m moving at slow speed.  Once I get along the road and stop they are fine. I see some posts…Continue

Vacuum advance

Started by Thomas Yarri in 1963/64 Cadillac Specific Discussion. Last reply by Thomas Yarri yesterday. 4 Replies

Good afternoon to all my fellow Cadillac owners! I have a question about the vacuum advance on my car. The car is a 64 without a/c and a Rochester carburetor. I noticed that I have vacuum at the port…Continue

Blog Posts

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service