Here is another part I have seen many times but might not be familiar to many and will post up as our next trivia question.

So, looking at the pictures below ... WHAT IS IT?

Views: 69

Reply to This

Replies to This Discussion

OK. This trivia may need some hints:
- There are two of them
- Located in interior of the car
- Helps secure something.

I believe it’s the stud that hold the dash pad to the dash

BINGO! These are the small ball studs that screw into the two vertical legs of the dash pad (upper instrument panel cover), and push into metal clips on the dash to help hold it in place.  Of course pulled used after 60 years they are usually more of a rusty color. Here is one of a few I threw into the cadmium plating batch.

Phillip..... HAVE A CIGAR!!!!

RSS

Photos

  • Add Photos
  • View All

Forum

Rescan of November 1962 Serviceman Bulletin Uploaded

Started by Jason Edge in General Discussion 16 hours ago. 0 Replies

Back in November I started rescanning the Serviceman Bulletins as a…Continue

Dino Undercarriage Restoration Continues Rearward at the Frame to Body Support Flat Braces

Started by Jason Edge in Restoration Discussion on Sunday. 0 Replies

After making a decent start on cleaning up a section below right rear area of my my 64 Coupe de Ville - Dino's undercarriage, I have been slow to make more progress but in the last couple of days…Continue

1964 Cadillac wagon by Victor Body Works

Started by john w. warner in For Sale. Last reply by Logan Robb on Friday. 2 Replies

Its on Hemmings.Needs work!Continue

1963 Cadillac Fleetwood 60 Special Eyebrow Molding

Started by Stephen Pechenik in Restoration Discussion. Last reply by Russ Austin on Wednesday. 6 Replies

I am readying my Fleetwood to be painted.  I need to replace the driver's side left chrome eyebrow molding (below the headlights).  It appears to be made from pot metal.  Mine is broken and I need to…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service