Trivia #32 --> What Is It??
Here is another part I have seen many times but might not be familiar to many and will post up as our next trivia question.
So, looking at the pictures below ... WHAT IS IT?
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
OK. This trivia may need some hints:
- There are two of them
- Located in interior of the car
- Helps secure something.
-
Permalink Reply by Phillip Hill on
-
I believe it’s the stud that hold the dash pad to the dash
-
-
BINGO! These are the small ball studs that screw into the two vertical legs of the dash pad (upper instrument panel cover), and push into metal clips on the dash to help hold it in place. Of course pulled used after 60 years they are usually more of a rusty color. Here is one of a few I threw into the cadmium plating batch.
Phillip..... HAVE A CIGAR!!!!
Photos
Members
Forum
DIDGAKNOWTHAT? - Notches for Holding License Plate Door Open when "Filling Up!"
Started by Jason Edge in General Discussion. Last reply by Jason Edge 3 hours ago. 3 Replies 0 Likes
I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not…Continue
Hesitation on starting after driving
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 28 Replies 0 Likes
I have noticed that after I drive for 5-10 miles or more and then shut off the car, it hesitates when I go to start? Anyone experience this before and if so, what was the fix?Continue
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dave Fehrle on Friday. 12 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Dino Diaries - 165,567 Miles & Counting
Started by Jason Edge in General Discussion on Friday. 0 Replies 0 Likes
I always get a kick out of the expression when someone asks how many…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Events
-
December 15, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
December 15, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
Videos
© 2024 Created by Jason Edge.
Powered by
