HI all,
I replaced my sending unit with a no name one off ebay and it is all over the place. It does not even attempt to have any accuracy.
We may try to fix the original unit. Seems like we need to replace the thin flat brass wire and the filter.
Has anyone bought and installed a new unit that works properly, and if so where did you get it?
Thanks
Jeff
Tags:
I have good new tested sending units for 70.00 plus shipping, please email me at russ@thecadishack.com
Started by Jason Edge in Chapter Discussion. Last reply by Dennis P. DiBari on Thursday. 6 Replies 0 Likes
I have been having some fun with ChatGPT recently and decided to have a quick go at our old "back of shirt" logo. In about 5 minutes I came up with what you see below. I thought it was impressive.…Continue
Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin Sep 7. 11 Replies 0 Likes
Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Sep 3. 3 Replies 0 Likes
Now as the trunk hinges are fixed, I realized there is not much left of the cardboard panels in the trunk which disintegrated more and more.Found a lot of sellers of interior carpets but none for…Continue
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Sammy Sep 3. 4 Replies 0 Likes
Hello folks,on a drive this weekend I had to open the trunk. Used the remote in the glovebox and it popped open a bit, but further opening was very hard und slow. I stood on the side of a main street…Continue
Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments 0 Likes
Hi Robert,
I emailed you more pictures for the Authenticity Manual.
Dennis DiBari
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2026 Created by Jason Edge.
Powered by