Hi Everyone:
The interior trim covering for my B Pillars is missing in my 64 Fleetwood, and I am wondering what the piece(s) looks like so I can recreate it.
I found this photo online (not a Fleetwood) - It looks like there is carpet on the bottom, and then maybe matching leather (?) above that. Is there a cardboard backer that ties it all together or are they separately attached? Also, does it vary based on model?
Tags:
There is no cardboard on the back... it is just a piece of carpet on the bottom sewn to a piece of vinyl/leather at the top, and glued to the metal inside B-pillar with what looks like that 3M spray adhesive. From memory there is not difference between 4 and 6 window sedans or the Fleetwood. What is different is color. I generally always save these from the parts cars and may have what you need in decent condition. I would need the trim code off you body plate to give me the color you need? You can email mail me offline at jasonedge64@outlook.com
I sent MIke an email this morning with pictures but thought I would share here showing the front and back of these. I was able to locate several colors in my stash but not the sandalwood with the cut pile that he needs. The only difference between these across the sedans, other than color, is going to be the carpet. The 1964 Series 62 sedans used a loop pile while the deVilles and Fleetwoods used a cut pile. After digging around I did find a set in sandalwood but with the loop pile from a Series 62. So, I got close but no cigar... so far.
Here is a picture showing front and back of these from a 1964 Fleetwood with light blue interior:
and here is a sample of some of the colors I have on hand. I do have more included in complete box sets but could not find Sandalwood ... so if any one by odd chance has this in nice condition with cut pile carpet in sandalwood contact Mike.
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by