Hi Everyone:
The interior trim covering for my B Pillars is missing in my 64 Fleetwood, and I am wondering what the piece(s) looks like so I can recreate it.
I found this photo online (not a Fleetwood) - It looks like there is carpet on the bottom, and then maybe matching leather (?) above that. Is there a cardboard backer that ties it all together or are they separately attached? Also, does it vary based on model?
Tags:
There is no cardboard on the back... it is just a piece of carpet on the bottom sewn to a piece of vinyl/leather at the top, and glued to the metal inside B-pillar with what looks like that 3M spray adhesive. From memory there is not difference between 4 and 6 window sedans or the Fleetwood. What is different is color. I generally always save these from the parts cars and may have what you need in decent condition. I would need the trim code off you body plate to give me the color you need? You can email mail me offline at jasonedge64@outlook.com
I sent MIke an email this morning with pictures but thought I would share here showing the front and back of these. I was able to locate several colors in my stash but not the sandalwood with the cut pile that he needs. The only difference between these across the sedans, other than color, is going to be the carpet. The 1964 Series 62 sedans used a loop pile while the deVilles and Fleetwoods used a cut pile. After digging around I did find a set in sandalwood but with the loop pile from a Series 62. So, I got close but no cigar... so far.
Here is a picture showing front and back of these from a 1964 Fleetwood with light blue interior:
and here is a sample of some of the colors I have on hand. I do have more included in complete box sets but could not find Sandalwood ... so if any one by odd chance has this in nice condition with cut pile carpet in sandalwood contact Mike.
Started by Jason Edge in General Discussion. Last reply by Kurt yesterday. 6 Replies 0 Likes
I have got a flood of email, texts, about the 63 Eldo that recently bid up to $120,000 and thought I would share for those that have not seen it.Here is the link:…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
Incredibly, in 3 days I have had 3 people ask about replacing their fuel pump or even adding an electric fuel pump because there carb is not getting gas. It has gotten to the point I have copied and…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 13 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Monday. 3 Replies 0 Likes
While enjoying the fruits of my labor on all new rear suspension and…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by