Has anyone here replaced the weatherstripping on the rear vent windows of a Fleetwood 60 Special? Unlike the front vent windows, the pivot shaft of the window is inserted into the weatherstipping itself. On the original rubber, there was a hole in the molded steel of the weatherstripping that it fit into. On the reproduction (Steele), there is just a rubber pocket with no metal backing, so a hole (with integrity) can't be drilled. As a result, I cant properly keep the window from falling out. I need to fabricate something....but not sure what quite yet. I'm hoping someone who has going through this can share some pointers. 

This is a little hard to explain, but if you've replaced this weatherstripping before, you should know what I'm talking about. 

Views: 148

Reply to This

Replies to This Discussion

See photos

Attachments:

Michael.  One would assume since the metal guide piece didn't come with the rubber you were to reuse the old metal I am seeing in the picture. I have some 60S rears somewhere and can take a look at one when it gets above 10 degrees, but perhaps you could transfer the old metal piece if not to far gone? Not sure if that is even possible.

The issue is the metal is molded into the weatherstripping itself. On the new piece there is also a metal strip molded in, but the area where I could potentially drill a hole is notched out and is only rubber. 

Michael, as a CLC member I would reach out to other members with a 63/64 Fleetwood and see if they have run into this rear vent window rubber seal issue. Marty Smith is one member that I know has restored a lot of his Fleetwood 60 Special. Looking at our 2023 CLC Directory there are 36 members with 1963 60 Specials and 47 with 1964 60 Specials.  You can pick out their emails and phone number sin the directory or you can also do online searches for members by model year and body style on the CLC Website under Member Resources once signed in. No sense in reinventing this wheel and I am sure out of over 80 60 Special Owners someone has been through this. Perhaps one of our 60 Special Owners that monitor this site has been through this and chime in.  Even thought I can go probably look at a used rear vent window without having that new piece in my hand I am just wildly guessing at what you are trying to do. Also, post to the CLC forums as I expect this issue spans forward and rearward beyond the 63/64 Cadillac model years.

Thanks Jason, good suggestions. Steele lists the replacement part for Fleetwoods from 61-64, so that broadens the search even more.

RSS

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith on Tuesday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service