Transmission rebuild
Can anyone in this community recommend a transmission shop in/near the Dayton, Ohio area that rebuilds older transmissions? Not having much luck searching the internet. Thank you.
Replies to This Discussion
-
Permalink Reply by Marshall Schlimer on
-
If you need tranny parts and advice, you can call the guys at Fatsco in NJ. They can definitely rebuild your tranny as well but its not an easy drop off from ohio. They did a fantastic job on mine and they guarantee they work for one year.
-
Permalink Reply by Sean Corley on
-
Thank you Marshall. I think I found a local guy. hopefully he works out. I appreciate your input.
Photos
Members
Forum
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Logan Robb 1 hour ago. 4 Replies 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Control Valve
Started by Michael Monson in Wanted to Buy 14 hours ago. 0 Replies 0 Likes
Looking for a heater control valve 9.795 for my 1964 Deville. ThanksContinue
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Sunday. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin Feb 18. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
