Turn signal arm removal and gear shifter arm
Looking for assistance in removing the turn signal arm from the turn signal assembly on a non-tilt steering column. Does it screw in there or do I need to take this little retainer off the top or ??? Thanks in advance.
Also, is there something that keeps the pin in place for the gear shifter arm or does the pin just need to be pushed out? I see a thin metal spacer between the top of the shifter and the pin, but I’m not sure if that’s holding the pin in there or not.
’63 Fleetwood Series 75
turn signal switch
shifter
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi Brandon,
Check that steering column diagram I sent you last week (The one you had to Google). It has all the parts of the steering column listed from top to bottom. It's the one Jason posted.
Dennis DiBari
-
Permalink Reply by Brandon N. on
-
I did but it didn’t help much.
-
Permalink Reply by Russ Austin on
-
The turn signal arm screw out. There are 2 flat spots where a wrench will fit. The shift lever pin is pushed out. I use a small brass punch and a hammer. Yes, there is a shim plate, so get that as well when the arm comes out. Take not as to what side it is on.
Photos
Members
Forum
Take heads off for rebuild
Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Monday. 3 Replies 0 Likes
Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue
Headlight conversion
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill Jul 27. 2 Replies 0 Likes
I recently converted my dim yellow headlights to LED after nearly cleaning up a roo the other night see attached pics for before and after …Continue
What parts do you need for your Cadillac?
Started by Russ Austin in General Discussion. Last reply by Russ Austin Jul 23. 2 Replies 0 Likes
What parts to your need for your Cadillac? Need a part to get it running or just to tidy things up a bit? Starters to nice A pillar moldings, my 1500 squarer footing shop is packed with parts. …Continue
Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!
Started by Jason Edge in General Discussion. Last reply by Cees de Bunje Jul 22. 10 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
Videos
© 2026 Created by Jason Edge.
Powered by
