Hi Everyone:

The interior trim covering for my B Pillars is missing in my 64 Fleetwood, and I am wondering what the piece(s) looks like so I can recreate it.

I found this photo online (not a Fleetwood) - It looks like there is carpet on the bottom, and then maybe matching leather (?) above that. Is there a cardboard backer that ties it all together or are they separately attached? Also, does it vary based on model?

Views: 78

Reply to This

Replies to This Discussion

There is no cardboard on the back... it is just a piece of carpet on the bottom sewn to a piece of vinyl/leather at the top, and glued to the metal inside B-pillar with what looks like that 3M spray adhesive. From memory there is not difference between 4 and 6 window sedans or the Fleetwood. What is different is color. I generally always save these from the parts cars and may have what you need in decent condition. I would need the trim code off you body plate to give me the color you need? You can email mail me offline at jasonedge64@outlook.com 

I sent MIke an email this morning with pictures but thought I would share here showing the front and back of these. I was able to locate several colors in my stash but not the sandalwood with the cut pile that he needs. The only difference between these across the sedans, other than color, is going to be the carpet.  The 1964 Series 62 sedans used a loop pile while the deVilles and Fleetwoods used a cut pile.  After digging around I did find a set in sandalwood but with the loop pile from a Series 62.  So, I got close but no cigar... so far.

Here is a picture showing front and back of these from a 1964 Fleetwood with light blue interior:

and here is a sample of some of the colors I have on hand. I do have more included in complete box sets but could not find Sandalwood ... so if any one by odd chance has this in nice condition with cut pile carpet in sandalwood contact Mike.

RSS

Photos

  • Add Photos
  • View All

Forum

Tissue holder

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion 3 hours ago. 0 Replies

Hi everyone I would like to know dose anybody here have a tissue holder fitted to their car if so could you please send me a picture of it thanks in advance Continue

CLC Membership Dues Go Up April 1st - Renew Now Thru March 31 & Lock in Current Rates!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion 22 hours ago. 0 Replies

CLC Membership dues are going up April 1. Join or Renew between now and March 31 and save! You can even renew with current rates for up to 3 years!Here is a breakdown of the rate increases Effective…Continue

Tags: Increase, Dues, CLC

CLC Membership dues are going up April 1. Join or Renew before March 31 & Save!

Started by Jason Edge in Chapter Discussion on Friday. 0 Replies

Here is a breakdown of the rate increases Effective April 1:E-membership…Continue

1964 Comfort Control Power Servos & Transducers - Feedback on Rebuilding

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Friday. 2 Replies

I often receive requests for good 1964 AC Heat Comfort Control Power Servo’s and/or Transducers. I currently have 6 Power Servos and 3 transducers and all leak down with the vacuum pump.  Some look…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service