64 metal dash paint
Any suggestions on where to find spay paint for metal section of my dash? It's a original redish color.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
It looks like from our Paint Chips help page showing interior colors, Ditzler 71353 is the number for the red used with 64-6267 de Villes with Exterior Paint code 29. If your paint shop can't match with that #, just have them scan the color from an unfaded area. Pull out the ash tray and the side section would be a good place to scan as it doesn't get the sunlight. Click Here to go directly to that particular help page scan.
-
Permalink Reply by John Inglesby on
-
THank you
Members
Forum
Original Rim Color
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Stinson 7 hours ago. 3 Replies 0 Likes
When I get some new shoes for my 64 Fleetwood, I'd like to recondition the rims. I'd thought of getting them powder coated, and still plan to eventually, but the $700 quote I received shunted that…Continue
Replacement Front Crankshaft Seal - 1964 Eldorado (429ci)
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith 11 hours ago. 1 Reply 0 Likes
My mechanic is having difficulty sourcing a front crankshaft seal. Can anyone recommend a replacement front crankshaft seal, and where to purchase? Amazon has a few that I think(?) are replacements…Continue
Tags: Seal, Crankshaft, Front
Logans Intake Project, 1964 Fleetwood, Progress Report #2
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 1 Reply 0 Likes
Hello all!Just a short update this evening!I wrestled with the exhaust manifold studs and ultimately chickened out on replacing all 4 of the studs. I only replaced the stud that I spun the threads…Continue
Rear main seal
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Monday. 5 Replies 0 Likes
Hi Everyone can somebody tell me where I can get a reliable rear main seal?I have done the end cap modification and replaced the seal twice,after around 500 miles it starts to leak again,not as bad…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
